Difficulty
Moderate
Steps
6
Time Required
20 minutes
Sections
1
- LCD Screen
- 6 steps
Flags
0
BackFujifilm FinePix S1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
LCD Screen
- Remove the 4 screws surrounding the LCD screen.
Remove the 4 screws surrounding the LCD screen.
1024
Step 2
- Use an opening tool to remove the casing on the hinge of the LCD screen.
Use an opening tool to remove the casing on the hinge of the LCD screen.
Step 3
- Use an opening tool to pry apart the LCD screen casing and remove the casing.
Use an opening tool to pry apart the LCD screen casing and remove the casing.
Step 4
- Remove the 2 screws located on the inner corners of the inside of the LCD screen.
Remove the 2 screws located on the inner corners of the inside of the LCD screen.
Step 5
- Disconnect the blue cable set by carefully prying it off with a spudger.
Disconnect the blue cable set by carefully prying it off with a spudger.
Step 6
- Use a spudger to lift the LCD screen out of its placement and remove it from the casing.
Use a spudger to lift the LCD screen out of its placement and remove it from the casing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Brandon Benavente
Member since: 02/15/2016
677 Reputation
6 Guides authored
Badges:
11
+8 more badges
Team
USF Tampa, Team 3-6, Sullivan Spring 2016
Member of USF Tampa, Team 3-6, Sullivan Spring 2016
USFT-SULLIVAN-S16S3G6
4 Members
12 Guides authored
