Fujifilm Finepix S1 Evf Lcd Button Replacement Repair Guide

Difficulty

Moderate

Steps

12

Time Required

Suggest a time??

Sections

2

• Back Camera Body
• 9 steps
• EVF/LCD Button Cover
• 3 steps

Flags

1

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackFujifilm FinePix S1

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Camera Body               

• Remove the 7 screws on the perimeter of the camera body.

Remove the 7 screws on the perimeter of the camera body.

1024

Step 2

• Remove the flash accessory cap.
• Remove the spacer covering the screws under the flash accessory cap.

Remove the flash accessory cap.

Remove the spacer covering the screws under the flash accessory cap.

Step 3

• Remove the 4 screws from the inside of the flash accessory slot.
• Pull off the flash accessory slot.

Remove the 4 screws from the inside of the flash accessory slot.

Pull off the flash accessory slot.

Step 4

• Remove the screw from LCD Screen hinge cover.
• Remove the LCD Screen hinge cover.

Remove the screw from LCD Screen hinge cover.

Remove the LCD Screen hinge cover.

Step 5

• Remove the 3 screws located on the LCD screen hinge.
• Remove the caps from both ends of the LCD screen hinge by lifting them off.

Remove the 3 screws located on the LCD screen hinge.

Remove the caps from both ends of the LCD screen hinge by lifting them off.

Step 6

• Remove the 2 screws from under the LCD hinge caps.

Remove the 2 screws from under the LCD hinge caps.

Step 7

• Pry apart the back body from the rest of the camera.

Pry apart the back body from the rest of the camera.

Step 8

• Carefully pull the back body off of the camera.
• Make sure to not yank off the connections from the body to the motherboard.

Carefully pull the back body off of the camera.

Make sure to not yank off the connections from the body to the motherboard.

Step 9

• Use a spudger to lift up on the tab, releasing the yellow wire strip.
• Use a spudger to lift up on the side tab, releasing the blue wire connection.

Use a spudger to lift up on the tab, releasing the yellow wire strip.

Use a spudger to lift up on the side tab, releasing the blue wire connection.

Step 10

              EVF/LCD Button Cover               

• Remove 2 screws from back of EVF/LCD button.

Remove 2 screws from back of EVF/LCD button.

Step 11

• Pull EVF/LCD button frame out from the camera casing.

Pull EVF/LCD button frame out from the camera casing.

Step 12

• Pull button cover off of the button frame.

Pull button cover off of the button frame.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Brandon Benavente                     

Member since: 02/15/2016

677 Reputation

                                      6 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       USF Tampa, Team 3-6, Sullivan Spring 2016                        

                                                  Member of USF Tampa, Team 3-6, Sullivan Spring 2016 



                    USFT-SULLIVAN-S16S3G6                     


                                            4 Members                     


                                            12 Guides authored