Difficulty

Difficult

Steps

17

Time Required

                          35 minutes

Sections

3

  • Frame
  • 7 steps
  • Motherboard
  • 8 steps
  • Lens
  • 2 steps

Flags

1

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

  • BackFujifilm FinePix HS30EXR

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Warning: The lens is very fragile; any scrape or fingerprint could result in a unusable lens. Take great caution in the replacement of the lens.

What you need

Step 1

              Frame
  • Flip the camera so that it is now upside down.
  • With a screwdriver, unscrew all highlighted screws.

Flip the camera so that it is now upside down.

With a screwdriver, unscrew all highlighted screws.

1024

Step 2

  • Flip the camera so that it is now on the right side.
  • With a screwdriver, unscrew all highlighted screws.

Flip the camera so that it is now on the right side.

Step 3

  • Flip the camera so that it is now on the left side.
  • Move or remove the flap hiding the camera ports.
  • With a screwdriver, unscrew all highlighted screws.

Flip the camera so that it is now on the left side.

Move or remove the flap hiding the camera ports.

Step 4

  • Flip the camera so that it is now on the top side.
  • With a spudger, pry off the highlighted metal piece of the camera.

Flip the camera so that it is now on the top side.

With a spudger, pry off the highlighted metal piece of the camera.

Step 5

  • With a screwdriver, unscrew all highlighted screws.

Step 6

  • Pull the LCD Screen up and out of the way.
  • With a screwdriver, unscrew all highlighted screws.

Pull the LCD Screen up and out of the way.

Step 7

  • With a spudger, pry off the frame.
  • If the frame does not easily dislodge after a few attempts, ensure that all screws are taken out.

With a spudger, pry off the frame.

If the frame does not easily dislodge after a few attempts, ensure that all screws are taken out.

Step 8

              Motherboard
  • Slowly and carefully pull the frame away to have a better view of the inside.

Slowly and carefully pull the frame away to have a better view of the inside.

Step 9

  • Peel back (or off) the black tape to expose more of the inside of the camera.
  • Flip the white switch of the highlighted chamber up, and that should unlock the ribbon cable from its compartment.
  • To see if this worked, gently pull the ribbon cable out of the compartment. It should come out without force.

Peel back (or off) the black tape to expose more of the inside of the camera.

Flip the white switch of the highlighted chamber up, and that should unlock the ribbon cable from its compartment.

To see if this worked, gently pull the ribbon cable out of the compartment. It should come out without force.

Step 10

  • Remove the ribbon cable.

Remove the ribbon cable.

Step 11

  • With a screwdriver, unscrew all highlighted screws.
  • Remove the metal casing.

Remove the metal casing.

Step 12

Step 13

  • Ensure the two ribbon cables highlighted are disconnected from the motherboard. (One is under the black tape.)

Ensure the two ribbon cables highlighted are disconnected from the motherboard. (One is under the black tape.)

Step 14

  • Begin un-soldering all highlighted areas.

Begin un-soldering all highlighted areas.

Step 15

  • Remove the motherboard
  • If your intention is to replace the motherboard, put your new motherboard in and begin re-soldering all cables back to the new motherboard.

Remove the motherboard

If your intention is to replace the motherboard, put your new motherboard in and begin re-soldering all cables back to the new motherboard.

Step 16

              Lens
  • Once the motherboard is taken out, with a screwdriver, unscrew all highlighted screws.
  • Take the lens off once it is unscrewed.

Once the motherboard is taken out, with a screwdriver, unscrew all highlighted screws.

Take the lens off once it is unscrewed.

Step 17

  • Un-attatch the current lens, and replace it with the new lens.

Un-attatch the current lens, and replace it with the new lens.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Andrew Scouten

Member since: 10/22/2018

739 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Baylor, Team S1-G2, Williams Fall 2018                        

                                                  Member of Baylor, Team S1-G2, Williams Fall 2018 



                    BU-WILLIAMS-F18S1G2                     


                                            4 Members                     


                                            12 Guides authored

khadgarai286 - Sep 19, 2021

Reply

What is the price for Normal lens for Fujifilm HS30EXR?