Difficulty

Moderate

Steps

8

Time Required

                          10 - 15 minutes

Sections

3

  • Back Cover
  • 4 steps
  • Front cover
  • 3 steps
  • Lens
  • 1 step

Flags

0

  • BackFujifilm Finepix F10

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Remove the screws from the bottom of the camera using the tri-wing screwdriver.
  • Three 5.4 mm tri-head screws.

Remove the screws from the bottom of the camera using the tri-wing screwdriver.

Three 5.4 mm tri-head screws.

1024

Step 2

  • Remove screws from charger side of camera using the Phillips 00 screwdriver.
  • Two 3.3 mm Phillips #00 screws.

Remove screws from charger side of camera using the Phillips 00 screwdriver.

Two 3.3 mm Phillips #00 screws.

Step 3

  • Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.
  • Two 3.3 mm Phillips #00 screws.

Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.

Step 4

  • Separate the front and back casing using the spudger.
  • Gently pull apart the two casings.
  • Pull the back casing away from the camera.

Separate the front and back casing using the spudger.

Gently pull apart the two casings.

Pull the back casing away from the camera.

Step 5

              Front cover
  • Remove screws from motherboard using the Phillips 00 screwdriver.
  • Two 2.5 mm widehead Phillips screws
  • One 3.3 mm #00 Phillips screws
  • Three 2.5 mm #00 Phillips screws (black screws)

Remove screws from motherboard using the Phillips 00 screwdriver.

Two 2.5 mm widehead Phillips screws

One 3.3 mm #00 Phillips screws

Three 2.5 mm #00 Phillips screws (black screws)

Step 6

  • Rotate the front cover clockwise onto its side and remove the single screw on the side using a Phillips 00 screwdriver.
  • Remove 3.3 mm #00 Phillips screw from the side of the front screen.

Rotate the front cover clockwise onto its side and remove the single screw on the side using a Phillips 00 screwdriver.

Remove 3.3 mm #00 Phillips screw from the side of the front screen.

Step 7

  • Firmly grasp both the motherboard and front cover. Slowly pull the front cover away from the motherboard.
  • Do not be alarmed if it takes substantial pressure to separate the two.

Firmly grasp both the motherboard and front cover. Slowly pull the front cover away from the motherboard.

Do not be alarmed if it takes substantial pressure to separate the two.

Step 8

              Lens
  • Firmly grasp the lens and pull completely from housing.

Firmly grasp the lens and pull completely from housing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 5 other contributors 


                    Sarah Looper

Member since: 03/11/2013

91 Reputation

                                      7 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Clemson, Team 13-4, Benson Spring 2013                        

                                                  Member of Clemson, Team 13-4, Benson Spring 2013 



                    CLEM-BENSON-S13S13G4                     


                                            2 Members                     


                                            16 Guides authored