Fujifilm Finepix F10 6 3 Mp Lens Filter Set Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          5 - 10 minutes            

Sections

2

• Back Cover
• 4 steps
• Lens Filter Set
• 3 steps

Flags

0

• BackFujifilm Finepix F10

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Cover               

• Remove the screws from the bottom of the camera using the tri-wing screwdriver.
• Three 5.4 mm tri-head screws.

Remove the screws from the bottom of the camera using the tri-wing screwdriver.

Three 5.4 mm tri-head screws.

1024

Step 2

• Remove screws from charger side of camera using the Phillips 00 screwdriver.
• Two 3.3 mm Phillips #00 screws.

Remove screws from charger side of camera using the Phillips 00 screwdriver.

Two 3.3 mm Phillips #00 screws.

Step 3

• Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.
• Two 3.3 mm Phillips #00 screws.

Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.

Step 4

• Separate the front and back casing using the spudger.
• Gently pull apart the two casings.
• Pull the back casing away from the camera.

Separate the front and back casing using the spudger.

Gently pull apart the two casings.

Pull the back casing away from the camera.

Step 5

              Lens Filter Set               

• Remove electrowind strip from font cover.
• The front cover does not have to be separated from the device for this step or the next ones.

Remove electrowind strip from font cover.

The front cover does not have to be separated from the device for this step or the next ones.

Step 6

• Remove lens data cable by gently pulling it out.

Remove lens data cable by gently pulling it out.

Step 7

• Remove lens filter.
• There are multiple square pieces, so be sure to remove them all.

Remove lens filter.

There are multiple square pieces, so be sure to remove them all.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Sarah Looper                     

Member since: 03/11/2013

91 Reputation

                                      7 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Clemson, Team 13-4, Benson Spring 2013                        

                                                  Member of Clemson, Team 13-4, Benson Spring 2013 



                    CLEM-BENSON-S13S13G4                     


                                            2 Members                     


                                            16 Guides authored