Difficulty

Moderate

Steps

7

Time Required

                          10 minutes

Sections

2

  • Back Cover
  • 4 steps
  • LCD
  • 3 steps

Flags

0

  • BackFujifilm Finepix F10

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Remove the screws from the bottom of the camera using the tri-wing screwdriver.
  • Three 5.4 mm tri-head screws.

Remove the screws from the bottom of the camera using the tri-wing screwdriver.

Three 5.4 mm tri-head screws.

1024

Step 2

  • Remove screws from charger side of camera using the Phillips 00 screwdriver.
  • Two 3.3 mm Phillips #00 screws.

Remove screws from charger side of camera using the Phillips 00 screwdriver.

Two 3.3 mm Phillips #00 screws.

Step 3

  • Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.
  • Two 3.3 mm Phillips #00 screws.

Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.

Step 4

  • Separate the front and back casing using the spudger.
  • Gently pull apart the two casings.
  • Pull the back casing away from the camera.

Separate the front and back casing using the spudger.

Gently pull apart the two casings.

Pull the back casing away from the camera.

Step 5

              LCD
  • Remove screws from the casing covering the LCD using the Phillips 00 screwdriver.
  • Remove the fifteen 2.9 mm Phillips #00 screws.

Remove screws from the casing covering the LCD using the Phillips 00 screwdriver.

Remove the fifteen 2.9 mm Phillips #00 screws.

Step 6

  • Slide casing out using the spudger.

Slide casing out using the spudger.

Step 7

  • Gently remove the LCD display data cable by gripping the end that is connected to the motherboard and pulling out.

Gently remove the LCD display data cable by gripping the end that is connected to the motherboard and pulling out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Sarah Looper

Member since: 03/11/2013

91 Reputation

                                      7 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Clemson, Team 13-4, Benson Spring 2013                        

                                                  Member of Clemson, Team 13-4, Benson Spring 2013 



                    CLEM-BENSON-S13S13G4                     


                                            2 Members                     


                                            16 Guides authored

Daniel - Apr 3, 2013

Reply

Great Guide! Worked great to replace my screen!

Johnston Thayer - Apr 3, 2013

Reply

Awesome guide! BEST WORK I’VE EVER SEEN ON A REPAIR GUIDE

Daniel - Apr 3, 2013

Shutter button replacement was great too!