Difficulty

Moderate

Steps

9

Time Required

                          30 minutes - 1 hour

Sections

1

  • Lens Housing
  • 9 steps

Flags

2

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackFujifilm FinePix AX655

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The camera will be completely open during this repair. Make sure to carefully follow the pictures in each step to assure you are dealing with the correct parts.

What you need

Step 1

              Lens Housing
  • Use a #00 Phillips screwdriver to remove all six screws around the camera that is holding the case.

Use a #00 Phillips screwdriver to remove all six screws around the camera that is holding the case.

1024

Step 2

  • Use a plastic pick to separate each side of the camera case apart.

Use a plastic pick to separate each side of the camera case apart.

Step 3

  • Remove the ribbon cable from the side of the logic board.

Remove the ribbon cable from the side of the logic board.

Step 4

  • Remove the four metal clips around the camera until you can feel the metal bracket that holds the screen pop off.

Remove the four metal clips around the camera until you can feel the metal bracket that holds the screen pop off.

Step 5

  • Carefully flip the screen and remove the ribbon cable attaching it to the logic board.

Carefully flip the screen and remove the ribbon cable attaching it to the logic board.

Step 6

  • Remove the three screws holding the sensor.

Remove the three screws holding the sensor.

Step 7

  • Remove the sensor ribbon cable from the logic board.

Remove the sensor ribbon cable from the logic board.

Step 8

  • Remove the lens housing ribbon cable.

Remove the lens housing ribbon cable.

Step 9

  • Remove the lens housing by moving the gray clip holding the unit.

Remove the lens housing by moving the gray clip holding the unit.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Zheng Xu

Member since: 09/18/2019

768 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Embry-Riddle Aeronautical University, Team S23-G6, McClure Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S23-G6, McClure Fall 2019 



                    ERAU-MCCLURE-F19S23G6                     


                                            6 Members                     


                                            10 Guides authored