Fujifilm Finepix A340 Lcd Screen Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          10 - 15 minutes            

Sections

2

• Outer Case
• 3 steps
• LCD Screen
• 5 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Missed a Step

Oops! This guide is currently missing some important steps.

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

• BackFujifilm FinePix A340

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Outer Case               

• To prevent the danger of electric shock, remove the batteries before continuing to the next steps.
• Slide the battery cover to the side to release the batteries.

To prevent the danger of electric shock, remove the batteries before continuing to the next steps.

Slide the battery cover to the side to release the batteries.

1024

Step 2

• Remove five screws from the camera casing using a tri-point Y0 screwdriver.

Remove five screws from the camera casing using a tri-point Y0 screwdriver.

Step 3

• Grab the case with your hands and slowly pull back the outer casing.

Grab the case with your hands and slowly pull back the outer casing.

Step 4

              LCD Screen               

• Locate the LCD screen and anchoring screw.
• Remove screw.

Locate the LCD screen and anchoring screw.

Remove screw.

Step 5

• Carefully pull the LCD screen away from the board it is connected to.

Carefully pull the LCD screen away from the board it is connected to.

Step 6

• Push both blue switches away from the holding device to unleach lcd ribbon.
• Be careful when removing ribbon. If you damage it, you will need to replace it as well.

Push both blue switches away from the holding device to unleach lcd ribbon.

Be careful when removing ribbon. If you damage it, you will need to replace it as well.

Step 7

• Carefully detach the ribbon from where it was connected by the blue pins.

Carefully detach the ribbon from where it was connected by the blue pins.

Step 8

• Now that everything has been disconnected from the board, remove LCD screen.

Now that everything has been disconnected from the board, remove LCD screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Cody                     

Member since: 04/18/2010

47 Reputation

                                      4 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Cal Poly, Team 7-11, Maness Spring 2010                        

                                                  Member of Cal Poly, Team 7-11, Maness Spring 2010 



                    CPSU-MANESS-S10S7G11                     


                                            3 Members                     


                                            4 Guides authored