Difficulty
Moderate
Steps
2
Time Required
Suggest a time??
Sections
1
- Viewfinder
- 2 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackFujifilm X20
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Note: images are from a Fujifilm X10, but the steps are the same for the X20, which will only have some additional ribbon wires coming from the viewfinder.
What you need
Step 1
Removing the existing viewfinder
- Using a small Philips screwdriver remove the 2 screws at the side of the viewfinder.
- With a pair of tweezers or an X-acto knife, remove the piece of tape on the other side of the viewfinder.
Using a small Philips screwdriver remove the 2 screws at the side of the viewfinder.
With a pair of tweezers or an X-acto knife, remove the piece of tape on the other side of the viewfinder.
1024
Step 2
Installing a new viewfinder
- Before installing a new viewfinder, fully extend the lens as shown in the picture.
- For reference, the 2nd picture shows the tracks for the guiding pins of the viewfinder in this position.
- You can then mount the viewfinder and follow step 1 in reverse to wrap up the replacement.
Before installing a new viewfinder, fully extend the lens as shown in the picture.
For reference, the 2nd picture shows the tracks for the guiding pins of the viewfinder in this position.
You can then mount the viewfinder and follow step 1 in reverse to wrap up the replacement.
That wraps it up, hope this prevents someone else from breaking their lens guide pins.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Joost Mertens
Member since: 06/09/2021
85 Reputation
1 Guide authored
Badges:
1
Mike Fatica - Jul 15, 2022
Reply
Hi Joost Mertens,
Do you know anyone who would do this for me?
Thank you.
