Fugoo Style Xl Speaker Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          30 minutes

Sections

Fabric Case
2 steps
Speaker
6 steps

Flags

BackFugoo Style XL
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Fabric Case

Using your hand, unscrew the large screws underneath the speaker.

Using your hand, unscrew the large screws underneath the speaker.

1024

Step 2

Using your hand, gently lift the large plastic tab secured to the rubber holding.
After lifting the tab, slide the speaker out of its case.
Ensure the tab is lifted only slightly above the rubber holding. Bending the plastic tab too far could result in damage to the case.

Using your hand, gently lift the large plastic tab secured to the rubber holding.

After lifting the tab, slide the speaker out of its case.

Ensure the tab is lifted only slightly above the rubber holding. Bending the plastic tab too far could result in damage to the case.

Step 3

              Speaker

There are 8 screws (4 on each side) holding covers that conceal the bass speakers. Remove these 3mm screws using a #2.0 Hex screwdriver.

There are 8 screws (4 on each side) holding covers that conceal the bass speakers. Remove these 3mm screws using a #2.0 Hex screwdriver.

Step 4

Using your hand, pull the covers away from the speaker.

Using your hand, pull the covers away from the speaker.

Step 5

Using a #2.0 Hex screwdriver to unscrew the 8 12mm screws depicted.

Using a #2.0 Hex screwdriver to unscrew the 8 12mm screws depicted.

Step 6

Gently pull apart the front casing from the back casing.
Speakers on the front casing have wires directly connected to the motherboard. Pulling off the casing with force will result in damage.

Gently pull apart the front casing from the back casing.

Speakers on the front casing have wires directly connected to the motherboard. Pulling off the casing with force will result in damage.

Step 7

Using a pair of tweezers or your hand, carefully remove the red bundled cable connectors from the motherboard.

Using a pair of tweezers or your hand, carefully remove the red bundled cable connectors from the motherboard.

Step 8

Each speaker is attached to the casing with 3mm screws. Remove the screws using a #2.0 Hex screwdriver.
Once the screws are removed, carefully lift the speaker from the casing.

Each speaker is attached to the casing with 3mm screws. Remove the screws using a #2.0 Hex screwdriver.

Once the screws are removed, carefully lift the speaker from the casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor

                    James Gifford

Member since: 09/25/2017

573 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team S3-G4, Cannon Fall 2017                        

                                                  Member of USF Tampa, Team S3-G4, Cannon Fall 2017 



                    USFT-CANNON-F17S3G4                     


                                            4 Members                     


                                            5 Guides authored

Andre Costa - Jul 25, 2019

Hello James,

Nice work. But where can I find the replacement speaker?! Best Regards

Introduction#

What you need#

Team#

Introduction

What you need

Team