Fugoo Style Xl Midwoofer Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          30 minutes

Sections

Fabric Case
2 steps
Midwoofer
7 steps

Flags

BackFugoo Style XL
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Fabric Case

Using your hand, unscrew the large screws underneath the speaker.

Using your hand, unscrew the large screws underneath the speaker.

1024

Step 2

Using your hand, gently lift the large plastic tab secured to the rubber holding.
After lifting the tab, slide the speaker out of its case.
Ensure the tab is lifted only slightly above the rubber holding. Bending the plastic tab too far could result in damage to the case.

Using your hand, gently lift the large plastic tab secured to the rubber holding.

After lifting the tab, slide the speaker out of its case.

Ensure the tab is lifted only slightly above the rubber holding. Bending the plastic tab too far could result in damage to the case.

Step 3

              Midwoofer

There are 8 screws (4 on each side) holding covers that conceal the bass speakers. Remove these 3mm screws using a #2.0 Hex screwdriver.

There are 8 screws (4 on each side) holding covers that conceal the bass speakers. Remove these 3mm screws using a #2.0 Hex screwdriver.

Step 4

Using your hand, pull the covers away from the speaker.

Using your hand, pull the covers away from the speaker.

Step 5

Using a #2.0 Hex screwdriver to unscrew the 8 12mm screws depicted.

Using a #2.0 Hex screwdriver to unscrew the 8 12mm screws depicted.

Step 6

Gently pull apart the front casing from the back casing.
Speakers on the front casing have wires directly connected to the motherboard. Pulling off the casing with force will result in damage.

Gently pull apart the front casing from the back casing.

Speakers on the front casing have wires directly connected to the motherboard. Pulling off the casing with force will result in damage.

Step 7

Using a pair of tweezers or your hand, carefully remove the red bundled cable connectors from the motherboard.
When the red bundled cable connectors are disconnected, set the outer casing aside.

Using a pair of tweezers or your hand, carefully remove the red bundled cable connectors from the motherboard.

When the red bundled cable connectors are disconnected, set the outer casing aside.

Step 8

Carefully untangle and remove the white bundled cable connectors from the motherboard.

Carefully untangle and remove the white bundled cable connectors from the motherboard.

Step 9

Using a T9 screwdriver, remove the 8 screws (4 on each speaker) surrounding the midwoofers.
Using your hand, carefully remove the midwoofers.

Using a T9 screwdriver, remove the 8 screws (4 on each speaker) surrounding the midwoofers.

Using your hand, carefully remove the midwoofers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    James Gifford

Member since: 09/25/2017

573 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team S3-G4, Cannon Fall 2017                        

                                                  Member of USF Tampa, Team S3-G4, Cannon Fall 2017 



                    USFT-CANNON-F17S3G4                     


                                            4 Members                     


                                            5 Guides authored

Michael Johnsson - Nov 13, 2022

can anyone tell me where I can buy the replacement speaker

Introduction#

What you need#

Team#

Introduction

What you need

Team