Difficulty
Very easy
Steps
7
Time Required
7 - 15 minutes
Sections
1
- Water Filter
- 7 steps
Flags
0
BackRefrigerator
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Water Filter
- On the right inner side of the fridge, you will find the model number.
- Identifying the correct model number will ensure the proper purchase of the new water filter.
On the right inner side of the fridge, you will find the model number.
Identifying the correct model number will ensure the proper purchase of the new water filter.
1024
Step 2
- Click options on the control panel on the front of the left door.
- Here it will say ice maker is on, click the minus button to turn it off.
- You will hear a beeping sound to ensure that the ice maker is turned off.
Click options on the control panel on the front of the left door.
Here it will say ice maker is on, click the minus button to turn it off.
You will hear a beeping sound to ensure that the ice maker is turned off.
Step 3
- The water filter is in the upper right corner of the fridge.
The water filter is in the upper right corner of the fridge.
Step 4
- To remove the water filter turn it to the right until you feel it detach.
- Then pull the filter straight out slowly from its slot.
- Water may drip from the filter upon removal. Putting a towel underneath and removing products from that area will ensure an easy clean-up.
To remove the water filter turn it to the right until you feel it detach.
Then pull the filter straight out slowly from its slot.
Water may drip from the filter upon removal. Putting a towel underneath and removing products from that area will ensure an easy clean-up.
Step 5
- Once the filter is removed, identify the model number on it.
- The model number will ensure you buy the correct replacement at the store.
Once the filter is removed, identify the model number on it.
The model number will ensure you buy the correct replacement at the store.
Step 6
- Upon getting the new filter from the store install it into the fridge.
- Insert the filter straight into its designated slot.
- Twist the filter to the right until you feel and hear it click into place.
Upon getting the new filter from the store install it into the fridge.
Insert the filter straight into its designated slot.
Twist the filter to the right until you feel and hear it click into place.
Step 7
- To turn the icemaker back on click the options button and hit the minus button, it will beep indicating it is back on.
- To reset the water filter you hit the down arrow button beneath the options button and go down to “water filter”.
- Press and hold the set button above the minus button on the right side, it will then say “good” next to the water filter.
- Press options again to return to the main screen.
To turn the icemaker back on click the options button and hit the minus button, it will beep indicating it is back on.
To reset the water filter you hit the down arrow button beneath the options button and go down to “water filter”.
Press and hold the set button above the minus button on the right side, it will then say “good” next to the water filter.
Press options again to return to the main screen.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Blake Mueller
Member since: 03/17/2021
154 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
Grand Valley State University, Team S3-G16, DeVasto Winter 2021
Member of Grand Valley State University, Team S3-G16, DeVasto Winter 2021
GVSU-DEVASTO-W21S3G16
1 Member
1 Guide authored
