Difficulty

Moderate

Steps

5

Time Required

                          5 - 10 minutes

Sections

1

  • Battery
  • 5 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackMarshall Kilburn Portable Bluetooth Speaker

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Lay the amp on its side. You should see a small door kept closed with two screws. Turn the amp so the small door faces you.

Lay the amp on its side. You should see a small door kept closed with two screws. Turn the amp so the small door faces you.

1024

Step 2

  • Using a TR10 Torx Security Screwdriver, remove the two screws from the door.
  • Remove the door.

Using a TR10 Torx Security Screwdriver, remove the two screws from the door.

Remove the door.

Step 3

  • Pull the yellow tab to remove the battery from the amp.

Pull the yellow tab to remove the battery from the amp.

Step 4

  • Carefully disconnect the battery cord from its socket. Carefully pinch the ends of the rectangular battery cord connector that is connected to the machine and gently pull the rectangular portion away from the machine so that it disconnects.

Carefully disconnect the battery cord from its socket. Carefully pinch the ends of the rectangular battery cord connector that is connected to the machine and gently pull the rectangular portion away from the machine so that it disconnects.

Step 5

  • To reassemble, plug in the new battery cord, and insert the battery pack; have the yellow tab repositioned as in step 3.

To reassemble, plug in the new battery cord, and insert the battery pack; have the yellow tab repositioned as in step 3.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    Edith-Marie Roper

Member since: 01/25/2017

102 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Washington State, Team 1-16, Staggers Spring 2017                        

                                                  Member of Washington State, Team 1-16, Staggers Spring 2017 



                    WSU-STAGGERS-S17S1G16                     


                                            1 Member                     


                                            1 Guide authored