Difficulty
Easy
Steps
5
Time Required
10 - 15 minutes
Sections
1
- Multi-Position Footrest
- 5 steps
Flags
2
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
BackFree Wheelchair Mission GEN_1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Familiarize yourself with the tools required for this procedure (listed below) by referencing the Tools Maintenance guide.
What you need
Step 1
Multi-Position Footrest
- Attach the extendable footrest bar to the front frame at the desired height
- Make sure the two bolt holes on the footrest bar line up with two of the holes on the front frame
Attach the extendable footrest bar to the front frame at the desired height
Make sure the two bolt holes on the footrest bar line up with two of the holes on the front frame
1024
Step 2
- Push a flat head bolt through the hole in the frame.
- Use the 10mm wrench to secure the nut on the other side of the bolt
- Twist the 10mm wrench counter-clockwise to tighten the nut
- Attach the three other flat-head bolts and nuts to the remaining holes by using the 10mm wrench
Push a flat head bolt through the hole in the frame.
Use the 10mm wrench to secure the nut on the other side of the bolt
Twist the 10mm wrench counter-clockwise to tighten the nut
Attach the three other flat-head bolts and nuts to the remaining holes by using the 10mm wrench
Step 3
- Attach the footrest to the footrest bar with the bottom of the footrest pointing upwards
- Match the footrest wedges up with the holes and push 4 small bolts through the holes
- The heads of the bolts should fit perfectly through the footrest
- Tighten the nuts onto the bolts using the 10mm wrench
- Make sure the nuts are securely fastened but do not tighten the nuts too tightly
Attach the footrest to the footrest bar with the bottom of the footrest pointing upwards
Match the footrest wedges up with the holes and push 4 small bolts through the holes
The heads of the bolts should fit perfectly through the footrest
Tighten the nuts onto the bolts using the 10mm wrench
Make sure the nuts are securely fastened but do not tighten the nuts too tightly
Step 4
- Flip the footrest back over and the footrest is now ready for use
- The footrest may be adjusted into 4 different locations depending on the height and comfort level of the recipient
Flip the footrest back over and the footrest is now ready for use
The footrest may be adjusted into 4 different locations depending on the height and comfort level of the recipient
Step 5
- To change the footrest’s position, repeat the previous steps but move the footrest bar to the preferred position by lining up the footrest bar with the holes on the sides of the frame
To change the footrest’s position, repeat the previous steps but move the footrest bar to the preferred position by lining up the footrest bar with the holes on the sides of the frame
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 6 other contributors
Mike Sevilla
Member since: 04/05/2013
348 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team 14-7, Maness Spring 2013
Member of Cal Poly, Team 14-7, Maness Spring 2013
CPSU-MANESS-S13S14G7
5 Members
7 Guides authored
