Fluke 77 Series Iii Lcd Screen Cover Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Front Panel
3 steps
LCD Screen Cover
1 step

Flags

BackFluke 77 Series III
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Front Panel

Be sure any test leads are out and the multimeter is off before opening the device.
Turn the multimeter so it is display side down.
Lift up the back stand of the device by putting your thumb in the curved well at the bottom of the device, so you have access to the two covered screws below.

Be sure any test leads are out and the multimeter is off before opening the device.

Turn the multimeter so it is display side down.

Lift up the back stand of the device by putting your thumb in the curved well at the bottom of the device, so you have access to the two covered screws below.

1024

Step 2

Use your Phillips #2 Screwdriver to remove the four black 21 mm Phillips #2 screws.

Use your Phillips #2 Screwdriver to remove the four black 21 mm Phillips #2 screws.

Step 3

Turn the Fluke 77 Series III Multimeter back over so that it is display side up.
Pry the front panel from the back panel at the seam.
If the front panel does not come off easily, move a plastic opening tool along the seam until the panels separate completely.

Turn the Fluke 77 Series III Multimeter back over so that it is display side up.

Pry the front panel from the back panel at the seam.

If the front panel does not come off easily, move a plastic opening tool along the seam until the panels separate completely.

Step 4

              LCD Screen Cover

Hold the front panel with both hands.
Use your thumbs to firmly, but carefully push the LCD screen cover out and into your fingers on the other side of the front panel.

Hold the front panel with both hands.

Use your thumbs to firmly, but carefully push the LCD screen cover out and into your fingers on the other side of the front panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors

                    Jessica Bombardier Shaw

Member since: 01/29/2014

1,006 Reputation

                                      7 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Cal Poly, Team 2-10, Amido Winter 2014                        

                                                  Member of Cal Poly, Team 2-10, Amido Winter 2014 



                    CPSU-AMIDO-W14S2G10                     


                                            4 Members                     


                                            10 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team