Difficulty

Moderate

Steps

11

Time Required

                          15 minutes

Sections

1

  • USB connector
  • 11 steps

Flags

0

  • BackFlip Video Ultra

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              USB connector
  • Unlock the battery cover by sliding the switch to the unlock position.

Unlock the battery cover by sliding the switch to the unlock position.

1024

Step 2

  • Remove the battery cover by sliding it down the camera.

Remove the battery cover by sliding it down the camera.

Step 3

  • Remove the batteries.

Remove the batteries.

Step 4

  • Slide the black upper casing off from the device.
  • This is a bit hard to get off, so don’t be afraid to use a bit of force. There is no lock.

Slide the black upper casing off from the device.

This is a bit hard to get off, so don’t be afraid to use a bit of force. There is no lock.

Step 5

  • Remove the six 1mm screws from front of the camera with the Phillips Head screwdriver.

Remove the six 1mm screws from front of the camera with the Phillips Head screwdriver.

Step 6

  • Remove the top casing from the bottom to reveal the inner circuit board.

Remove the top casing from the bottom to reveal the inner circuit board.

Step 7

  • When removing the back panel, the rubber buttons will become loose and likely fall off the board. This is normal and can easily placed back on the board once finished.
  • Remove the six 1mm screws with the 1 Phillips head screwdriver.

When removing the back panel, the rubber buttons will become loose and likely fall off the board. This is normal and can easily placed back on the board once finished.

Remove the six 1mm screws with the 1 Phillips head screwdriver.

Step 8

  • Gently separate the circuit board from the casing.

Gently separate the circuit board from the casing.

Step 9

  • Remove the three 1mm screws from the USB connector and back casing with the Phillips Head screwdriver.

Remove the three 1mm screws from the USB connector and back casing with the Phillips Head screwdriver.

Step 10

  • Gently lift the usb connector using the Plastic opening tool.
  • Using tweezers, remove the cord from the motherboard by gently lifting the connector.
  • The connector will be easier to remove if you wiggle the tweezers while lifting.

Gently lift the usb connector using the Plastic opening tool.

Using tweezers, remove the cord from the motherboard by gently lifting the connector.

The connector will be easier to remove if you wiggle the tweezers while lifting.

Step 11

  • Fully remove the USB connector and replace it with the new USB connector.

Fully remove the USB connector and replace it with the new USB connector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Nathaniel Ruf

Member since: 10/18/2016

514 Reputation

                                      5 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team 5-7, Martin Fall 2016                        

                                                  Member of UMass Dartmouth, Team 5-7, Martin Fall 2016 



                    UMASSD-MARTIN-F16S5G7                     


                                            3 Members                     


                                            10 Guides authored

Corrina Guerrero - Sep 18, 2018

Reply

My USB port broke off so is there anyway I could save my videos that where om there

DeEtte Moore - Jul 6, 2019

Reply

Where do you purchase the replacement usb connector?