Difficulty

Moderate

Steps

6

Time Required

                          5 minutes

Sections

2

  • Outer Shell
  • 5 steps
  • Flip Video Directional button replacement or cleaning
  • 1 step

Flags

0

  • BackFlip Video

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Outer Shell
  • Turn off the device and take the batteries out.
  • Remove metal sticker under the LCD screen with a spudger.
  • This may require a large force to pry off the glued sticker.

Turn off the device and take the batteries out.

Remove metal sticker under the LCD screen with a spudger.

This may require a large force to pry off the glued sticker.

1024

Step 2

  • Remove the 4 gray screw caps with the spudger. These cover the screw heads and protect from dirt or grime.

Remove the 4 gray screw caps with the spudger. These cover the screw heads and protect from dirt or grime.

Step 3

  • Remove the 5 10mm screws with the #00 Phillips screwdriver. These connect the back of the outer shell to the front of the outer shell.

Remove the 5 10mm screws with the #00 Phillips screwdriver. These connect the back of the outer shell to the front of the outer shell.

Step 4

  • Open battery door. This can be done by gently depressing and sliding the battery down downward.

Open battery door. This can be done by gently depressing and sliding the battery down downward.

Step 5

  • Use the spudger to separate outer shells.
  • The spudger must be inserted between the shell halves to pry the edges apart.
  • Slowly work around the outside to separate the halves.

Use the spudger to separate outer shells.

The spudger must be inserted between the shell halves to pry the edges apart.

Slowly work around the outside to separate the halves.

Step 6

              Flip Video Directional button replacement or cleaning
  • Remove the silicone directional pad insert from the front outer shell.
  • Clean the buttons with soapy water before reassembling the device.
  • Make sure it is completely dry before placing back into the device.

Remove the silicone directional pad insert from the front outer shell.

Clean the buttons with soapy water before reassembling the device.

Make sure it is completely dry before placing back into the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 6 other contributors 


                    Elizabeth

Member since: 04/15/2010

100 Reputation

                                      6 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team 26-21, Regan Spring 2010                        

                                                  Member of Cal Poly, Team 26-21, Regan Spring 2010 



                    CPSU-REGAN-S10S26G21                     


                                            4 Members                     


                                            12 Guides authored