Flip Minohd Display Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          7 minutes

Sections

Casing
2 steps
Display Screen
2 steps

Flags

BackFlip Video MinoHD
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Casing

With the plastic opening tool, remove labels from the Flip Mino HD. 2 small black screws should appear.
With the Phillips Screwdriver 000, unscrew the 2 screws and set aside in a safe place.

With the plastic opening tool, remove labels from the Flip Mino HD. 2 small black screws should appear.

With the Phillips Screwdriver 000, unscrew the 2 screws and set aside in a safe place.

1024

Step 2

With the plastic opening tool, gently pry the front casing away from the device by carefully running the tool around each edge and lifting.
Do not pull to remove the casing until all sides are loose. You may break or crack the case.
Once case is loose, flip up and over the device. Note that casing is still connected to the device.
Using tweezers, pull connecting strip to disconnect it from its socket on the logic board.

With the plastic opening tool, gently pry the front casing away from the device by carefully running the tool around each edge and lifting.

Do not pull to remove the casing until all sides are loose. You may break or crack the case.

Once case is loose, flip up and over the device. Note that casing is still connected to the device.

Using tweezers, pull connecting strip to disconnect it from its socket on the logic board.

Step 3

              Display Screen

Using tweezers, pull connecting strip away from its socket on the logic board.
With the plastic opening tool, take the display screen out of its socket by gently lifting each corner. Flip the screen up towards the logic board that it is still connected to.
With the spudger, gently lift the film underneath the display bracket and peel away. Set aside.
With the plastic opening tool, gently pry open metal display bracket to remove from logic board.
Using fingernail, pry black tape up from zif socket to remove the partially attached display screen.

Using tweezers, pull connecting strip away from its socket on the logic board.

With the plastic opening tool, take the display screen out of its socket by gently lifting each corner. Flip the screen up towards the logic board that it is still connected to.

With the spudger, gently lift the film underneath the display bracket and peel away. Set aside.

With the plastic opening tool, gently pry open metal display bracket to remove from logic board.

Using fingernail, pry black tape up from zif socket to remove the partially attached display screen.

Step 4

Now your display screen is liberated and ready to replace. To install a new one, follow these steps backwards.

Now your display screen is liberated and ready to replace. To install a new one, follow these steps backwards.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Abigail Buckenberger

Member since: 01/06/2016

684 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Eastern Washington University, Team 2-1, Andersen Winter 2016                        

                                                  Member of Eastern Washington University, Team 2-1, Andersen Winter 2016 



                    EWU-ANDERSEN-W16S2G1                     


                                            4 Members                     


                                            10 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team