Difficulty
Easy
Steps
2
Time Required
5 minutes
Sections
1
- Casing
- 2 steps
Flags
0
BackFlip Video MinoHD
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Casing
- With the plastic opening tool, remove labels from the Flip Mino HD. 2 small black screws should appear.
- With the Phillips Screwdriver 000, unscrew the 2 screws and set aside in a safe place.
With the plastic opening tool, remove labels from the Flip Mino HD. 2 small black screws should appear.
With the Phillips Screwdriver 000, unscrew the 2 screws and set aside in a safe place.
1024
Step 2
- With the plastic opening tool, gently pry the front casing away from the device by carefully running the tool around each edge and lifting.
- Do not pull to remove the casing until all sides are loose. You may break or crack the case.
- Once case is loose, flip up and over the device. Note that casing is still connected to the device.
- Using tweezers, pull connecting strip to disconnect it from its socket on the logic board.
With the plastic opening tool, gently pry the front casing away from the device by carefully running the tool around each edge and lifting.
Do not pull to remove the casing until all sides are loose. You may break or crack the case.
Once case is loose, flip up and over the device. Note that casing is still connected to the device.
Using tweezers, pull connecting strip to disconnect it from its socket on the logic board.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Abigail Buckenberger
Member since: 01/06/2016
684 Reputation
5 Guides authored
Badges:
12
+9 more badges
Team
Eastern Washington University, Team 2-1, Andersen Winter 2016
Member of Eastern Washington University, Team 2-1, Andersen Winter 2016
EWU-ANDERSEN-W16S2G1
4 Members
10 Guides authored