Fixing A Wobbly Armrest On The Vonracer Gaming Chair Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 minutes

Sections

Fixing a Wobbly Armrest on the VonRacer Gaming Chair
4 steps

Flags

BackFurniture
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

There are 2 reasons why the arm rest may be wobbling, either the M8 bolts aren’t aligned and tightened properly on the bottom cushion, or the screws inside the arm rest itself may be loose.

What you need

Step 1

              Fixing a Wobbly Armrest on the VonRacer Gaming Chair

To be able to reach the bolts on the bottom of the seat in an easily accessible manner, you should pull out the leg rest and recline the seat all the way back.
After doing so, put the chair on its side.
This is recommended to be able to have an easier time removing the screws.

To be able to reach the bolts on the bottom of the seat in an easily accessible manner, you should pull out the leg rest and recline the seat all the way back.

After doing so, put the chair on its side.

This is recommended to be able to have an easier time removing the screws.

1024

Step 2

Remove the two 25 mm arm rest bolts with an M8 hex screwdriver.
Remove the arm rest.

Remove the two 25 mm arm rest bolts with an M8 hex screwdriver.

Remove the arm rest.

Step 3

Tighten the three screws on the arm rest, one for the elbow joint and two for the arm rest cushion, with a Phillips #1 screwdriver.
Give the arm rest a shake to ensure there is no wobble in the two joints.

Tighten the three screws on the arm rest, one for the elbow joint and two for the arm rest cushion, with a Phillips #1 screwdriver.

Give the arm rest a shake to ensure there is no wobble in the two joints.

Step 4

Align the arm rest with the two screw holes on the bottom of the seat.
Replace the two 25 mm M8 hex screws to secure the arm rest.
Be sure to sufficiently tighten these screws to eliminate any wobble.

Align the arm rest with the two screw holes on the bottom of the seat.

Replace the two 25 mm M8 hex screws to secure the arm rest.

Be sure to sufficiently tighten these screws to eliminate any wobble.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor

                    Abdullahi Hassan

Member since: 09/21/2020

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       York University, Team S1-G8, Woodhouse Fall 2020                        

                                                  Member of York University, Team S1-G8, Woodhouse Fall 2020 



                    YORK-WOODHOUSE-F20S1G8                     


                                            1 Member                     


                                            1 Guide authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team