Difficulty

Moderate

Steps

12

Time Required

                          30 minutes - 2 hours

Sections

1

  • fix clouding
  • 12 steps

Flags

2

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackLG 32LF360V

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Lay the TV upright
  • Lay the TV face down on a table so that the stand is not touching the table and the TV is level.
  • It is best to place a soft cloth under the display so that it cannot be scratched.

Lay the TV face down on a table so that the stand is not touching the table and the TV is level.

It is best to place a soft cloth under the display so that it cannot be scratched.

1024

Step 2

              Dismantle the stand
  • Unscrew the two Phillips screws from the base and pull it down so that it can be loosened.

Unscrew the two Phillips screws from the base and pull it down so that it can be loosened.

Step 3

              Dismantle the back cover
  • Unscrew the six Phillips screws from the back cover.
  • The one screw between the connectors has a different shape than the others, keep it separate from the others.
  • Now slide a pick between the back cover and the frame and gradually separate them until all sides are loose.
  • The upper side can take a lot of force, if it doesn’t work with a pick, try to open the back cover as far as possible until the upper side detaches itself.

Unscrew the six Phillips screws from the back cover.

The one screw between the connectors has a different shape than the others, keep it separate from the others.

Now slide a pick between the back cover and the frame and gradually separate them until all sides are loose.

The upper side can take a lot of force, if it doesn’t work with a pick, try to open the back cover as far as possible until the upper side detaches itself.

Step 4

              Dismantle the IR receiver
  • Take the IR receiver out of its place and disconnect the cable from the mainboard.
  • The cable can break quickly, disconnect it carefully.

Take the IR receiver out of its place and disconnect the cable from the mainboard.

The cable can break quickly, disconnect it carefully.

Step 5

              Dismantle loudspeaker
  • Take the speakers out of their place and disconnect the cables.

Take the speakers out of their place and disconnect the cables.

Step 6

              Remove covers
  • Unscrew the 8 Phillips screws from the two metal covers on the bottom of the TV.

Unscrew the 8 Phillips screws from the two metal covers on the bottom of the TV.

Step 7

              Disconnect flex cable
  • Now fold up the two black brackets on the boards you just uncovered and take out the flex cables.
  • The brown flex cables at the bottom of the boards are very sensitive. If these are damaged, the entire display may no longer work.

Now fold up the two black brackets on the boards you just uncovered and take out the flex cables.

The brown flex cables at the bottom of the boards are very sensitive. If these are damaged, the entire display may no longer work.

Step 8

              remove the frame
  • Unscrew the 18 Phillips screws on the sides of the TV.
  • Turn the TV over.
  • Carefully remove the frame around the display.

Unscrew the 18 Phillips screws on the sides of the TV.

Turn the TV over.

Carefully remove the frame around the display.

Step 9

              remove the display
  • Before you start: the LCD display is highly sensitive and can break at the slightest bend. Be as careful as possible with this step and give yourself enough time.
  • Use several suction cups to remove the LCD display from the frame.
  • Again, you have to be careful with the brown flex cables just mentioned, as they come out with the display in this step.

Before you start: the LCD display is highly sensitive and can break at the slightest bend. Be as careful as possible with this step and give yourself enough time.

Use several suction cups to remove the LCD display from the frame.

Again, you have to be careful with the brown flex cables just mentioned, as they come out with the display in this step.

Step 10

              2. Remove frame
  • Remove the 2nd frame with e.g. a spudger by releasing the small clips on the sides.

Remove the 2nd frame with e.g. a spudger by releasing the small clips on the sides.

Step 11

              Remove foils
  • Remove the multiple layers of film from the TV.
  • The foils must be reinstalled later in the same order. Don’t swap them.

Remove the multiple layers of film from the TV.

The foils must be reinstalled later in the same order. Don’t swap them.

Step 12

              Glue on diffuser lenses
  • Glue the scattered lenses back on, e.g. with superglue.
  • Make sure that the 3 pins on the scatter lenses are correctly seated on the LED strip when you stick them on.
  • Congratulations! You managed to fix your TV!

Glue the scattered lenses back on, e.g. with superglue.

Make sure that the 3 pins on the scatter lenses are correctly seated on the LED strip when you stick them on.

Congratulations! You managed to fix your TV!

Work the steps in reverse order to reassemble your device.

Cancel: I did not complete this guide.

        HelloMacOS is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

HelloMacOS

Author

                                      with 1 other contributor 


                    Nikiboy

Member since: 11/27/2021

237 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges