Difficulty

Moderate

Steps

1

Time Required

                          20 - 35 minutes

Sections

  • Plastic washer(s) on motor spindle
  • 1 step

Flags

2

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Needs Transcription

This guide is in video form only. Help make it more accessible by transcribing each action of the procedure into a separate step and adding photos.

  • BackRoomba E/I/J-Series

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The object of the repair is to (remove a defective washer) and install a new micro high-speed bearing on the fan motor shaft.

This is a low-cost easy-to-install service kit for E-series, I-series, or J-series Roombas with (Insufficient Airflow) error 11, error 26, or error 30.

To order the kit please see the eBay item https://www.ebay.ca/itm/363975278455

This service kit works for the following iRobot vacuum models.

 … e5 and e6 Roomba i1 and i1+ Roomba i2 and i2+ Roomba i3 and i3+ Roomba i4 and i4+ Roomba i5 andi5+ Roomba i6 and i6+ Roomba i7 and i7+ Roomba i8 and i8+ Roomba j7 and j7+ Roomba j8 and j8+

 

Cheers, John

Roomba Refuge

What you need

Video Overview

Step 1

              Plastic washer(s) on motor spindle
  • Take your time watch the video

Take your time watch the video

1024

Please watch the video as you do the repair.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Roomba Refuge

Member since: 11/23/2022

73 Reputation

                                      1 Guide authored                  



                       Badges:
                       2