Difficulty

Easy

Steps

8

Time Required

                          2 days

Sections

1

  • Fix Broken Dishes using Warm Milk
  • 8 steps

Flags

0

  • BackBroken Dishes

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Fix Broken Dishes using Warm Milk
  • Get ready to fix broken dishes.

Get ready to fix broken dishes.

1024

Step 2

  • Prepare the tape. (You are going to use the tape to hold broken pieces together temporarily.)

Prepare the tape. (You are going to use the tape to hold broken pieces together temporarily.)

Step 3

  • Put the plate back together and tape the broken pieces into place.
  • Be sure not to leave too large of gaps between the pieces so that the milk is able to bind the two surfaces together.

Put the plate back together and tape the broken pieces into place.

Be sure not to leave too large of gaps between the pieces so that the milk is able to bind the two surfaces together.

Step 4

  • Pour a generous amount of milk into a pot large enough to fit the entire dish being repaired.
  • The entire dish will need to be submerged for this to work, so test out if the dish can fit completely within the pot before you boil the milk.
  • Then heat the milk until it is near boiling.

Pour a generous amount of milk into a pot large enough to fit the entire dish being repaired.

The entire dish will need to be submerged for this to work, so test out if the dish can fit completely within the pot before you boil the milk.

Then heat the milk until it is near boiling.

Step 5

  • Gently submerge the broken dish completely in the hot milk.

Gently submerge the broken dish completely in the hot milk.

Step 6

  • Leave the broken dish inside of the pot for 48 hours.

Leave the broken dish inside of the pot for 48 hours.

Step 7

  • Take out the broken dish from the pot.
  • Remove the tape from the dish.

Take out the broken dish from the pot.

Remove the tape from the dish.

Step 8

  • Check that the broken pieces now hold together on their own. If some of the pieces are still not connected, you may have to try again.

Check that the broken pieces now hold together on their own. If some of the pieces are still not connected, you may have to try again.

Without using a chemical glue, your broken piece should be attached to original dishes.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Juhwan Kim

Member since: 05/13/2020

157 Reputation

                                      1 Guide authored                  



                       Badges:
                       1