Fix A Loose Mounting Dream Md2462 Tv Wall Mount Repair Guide

Difficulty

Moderate

Steps

Time Required

                          1 - 2 hours

Sections

Fix a Loose Mounting Dream MD2462 TV Wall Mount
8 steps

Flags

BackHousehold Item
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

It is also essential to note that this product contains small items which may be choking hazards for children. Before beginning this guide, make sure that all the parts are in good condition. The product also includes some extra hardware components, which might not be needed.

What you need

Step 1

              Fix a Loose Mounting Dream MD2462 TV Wall Mount

Remove the two M4x5mm bolts on the back of the TV plate using a Phillips #00 screwdriver.
Unplug the TV cables before removing the TV from the wall.

Remove the two M4x5mm bolts on the back of the TV plate using a Phillips #00 screwdriver.

Unplug the TV cables before removing the TV from the wall.

1024

Step 2

Remove the three lag bolts from the wall mount by using a 13mm open-end wrench.
If it is too loose, it can just be pulled out.

Remove the three lag bolts from the wall mount by using a 13mm open-end wrench.

If it is too loose, it can just be pulled out.

Step 3

Fill the holes where the screws were secured using drywall spackle.

Fill the holes where the screws were secured using drywall spackle.

Step 4

Locate the wooden studs on the wall using a stud finder or knock on the wall to see if the stud is behind the wall.

Locate the wooden studs on the wall using a stud finder or knock on the wall to see if the stud is behind the wall.

Step 5

Use a pencil to mark three holes on the wall.
Use a 3/8-inch drill bit to drill three holes at the marked positions.
Secure the wall mount into the wooden studs using new screws or bolts.
Ensure that all the screws are firmly secured to the wooden stud.

Use a pencil to mark three holes on the wall.

Use a 3/8-inch drill bit to drill three holes at the marked positions.

Secure the wall mount into the wooden studs using new screws or bolts.

Ensure that all the screws are firmly secured to the wooden stud.

Step 6

Test the firmness of the TV wall mount by gently pushing it up and down.

Test the firmness of the TV wall mount by gently pushing it up and down.

Step 7

Gently replace the TV back on the wall mount.

Gently replace the TV back on the wall mount.

Step 8

Make sure the TV is secure and well-centered on the wall mount using a spirit level gauge to confirm the inclination.

Make sure the TV is secure and well-centered on the wall mount using a spirit level gauge to confirm the inclination.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Emmanuel Emedeke

Member since: 09/17/2020

184 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       York University, Team S2-G6, Melo-Thaiss Fall 2020                        

                                                  Member of York University, Team S2-G6, Melo-Thaiss Fall 2020 



                    YORK-MELO-THAISS-F20S2G6                     


                                            1 Member                     


                                            1 Guide authored

Introduction#

What you need#

Team#

Introduction

What you need

Team