Difficulty
Moderate
Steps
4
Time Required
35 minutes
Sections
1
- Speaker
- 4 steps
Flags
0
- History
- Save to Favorites
- Download PDF
- Edit
- Translate
- Get Shareable Link
- Embed This Guide
- Notify Me of Changes
- Stop Notifications
Introduction
Replacement speaker link-
https://www.ebay.com/i/133108464008?chn=…
General Disassembly video-
What you need
Step 1
Speaker
- Pry open the case using the opening tool.
- Make sure to pry around the whole case before removing the top case.
Pry open the case using the opening tool.
Make sure to pry around the whole case before removing the top case.
1024
Step 2
- After removing the top case identify the speakers and wires connected to the motherboard.
After removing the top case identify the speakers and wires connected to the motherboard.
Step 3
- Gently pop off the speakers using your fingers where the speakers were located in the previous step.
Gently pop off the speakers using your fingers where the speakers were located in the previous step.
Step 4
- Remove wires around the motherboard carefully using an ESD safe tweezer and a soldering iron at the attached point of the speaker cable.
- Check out the How to Solder and Desolder Connections guide.
Remove wires around the motherboard carefully using an ESD safe tweezer and a soldering iron at the attached point of the speaker cable.
Check out the How to Solder and Desolder Connections guide.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 7 other contributors
Vittorio Custode
Member since: 09/27/2019
109 Reputation
1 Guide authored
Badges:
2
Team
Embry-Riddle Aeronautical University, Team S1-G5, Watkins Fall 2019
Member of Embry-Riddle Aeronautical University, Team S1-G5, Watkins Fall 2019
ERAU-WATKINS-F19S1G5
4 Members
10 Guides authored
Alex Watkins - Oct 24, 2019
Reply
Note that this is the speaker, not the camera. The page title is still wrong.