Difficulty
Moderate
Steps
5
Time Required
30 minutes
Sections
1
- Fiat 500 Abarth Taillight
- 5 steps
Flags
0
BackFiat
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Fiat 500 Abarth Taillight
- Remove the two 10 mm bolts to the side of the taillight.
Remove the two 10 mm bolts to the side of the taillight.
1024
Step 2
- Using a pry tool or something flat, carefully get in-between the light and the car and pry the light off.
- The light still has cable connections to the car body, so be sure not to rip these during removal.
Using a pry tool or something flat, carefully get in-between the light and the car and pry the light off.
The light still has cable connections to the car body, so be sure not to rip these during removal.
Step 3
- There are several little clips on this module.
- Unclip the clips on the back of the light and remove the panel.
There are several little clips on this module.
Unclip the clips on the back of the light and remove the panel.
Step 4
- Remove the burnt out bulb by pulling it out from the panel.
Remove the burnt out bulb by pulling it out from the panel.
Step 5
- Clip the panel back onto the light and put it back into the frame of the car.
- Replace the two bolts with a 10 mm socket.
Clip the panel back onto the light and put it back into the frame of the car.
Replace the two bolts with a 10 mm socket.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 5 other contributors
Tim Polishchuk
Member since: 01/11/2021
152 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
Eastern Washington University, Team S1-G28, Carnegie Winter 2021
Member of Eastern Washington University, Team S1-G28, Carnegie Winter 2021
EWU-CARNEGIE-W21S1G28
1 Member
4 Guides authored
