Difficulty

Easy

Steps

7

Time Required

                          5 - 10 minutes            

Sections

2

  • Back panel
  • 3 steps
  • Speaker
  • 4 steps

Flags

0

  • BackFender Frontman 15r

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back panel               
  • Be sure to unplug the device before proceeding.
  • Use a Phillips #0 screwdriver to remove the four 21.7mm screws holding the back panel to the frame.

Be sure to unplug the device before proceeding.

Use a Phillips #0 screwdriver to remove the four 21.7mm screws holding the back panel to the frame.

1024

Step 2

  • Once the screws are out, use a plastic opening tool or spudger to pry the top of the back panel open. There may be some resistance, but it will eventually pry loose.

Once the screws are out, use a plastic opening tool or spudger to pry the top of the back panel open. There may be some resistance, but it will eventually pry loose.

Step 3

  • Once the top is separated, use your hand to remove the back panel from the unit.

Once the top is separated, use your hand to remove the back panel from the unit.

Step 4

              Speaker               
  • Using tape or a post-it, label the input and output wires on the reverb. Remove these wires from the box.

Using tape or a post-it, label the input and output wires on the reverb. Remove these wires from the box.

Step 5

  • Remove the two female connection terminals from the speaker terminals.

Remove the two female connection terminals from the speaker terminals.

Step 6

  • Use a Philips #1 screwdriver to remove the four 21.9 mm Phillips screws from the perimeter of the speaker.

Use a Philips #1 screwdriver to remove the four 21.9 mm Phillips screws from the perimeter of the speaker.

Step 7

  • Gently remove the speaker.

Gently remove the speaker.

To install the new speaker, follow the instructions given in reverse.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    Stephen Figueira                     

Member since: 10/04/2012

131 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Cal Poly, Team 24-30, Regan Fall 2012                        

                                                  Member of Cal Poly, Team 24-30, Regan Fall 2012 



                    CPSU-REGAN-F12S24G30                     


                                            5 Members                     


                                            7 Guides authored