Difficulty

Very easy

Steps

5

Time Required

                          15 minutes            

Sections

1

  • Felco Gartenschere - Pruners Disassembly
  • 5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackLawn and Garden

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Various types available               
  • There are several types - e.g. also for left-handers, here a Felco Nr 4 is shown.

There are several types - e.g. also for left-handers, here a Felco Nr 4 is shown.

1024

Step 2

              Release mother               
  • First, the upper nut SW 13 is released, then the scissors is turned over.
  • The spring can be easily removed.

First, the upper nut SW 13 is released, then the scissors is turned over.

The spring can be easily removed.

Step 3

              Release screw from below               
  • Now the hinge screw can be unscrewed. Here SW 14 is used Next to it lies the spring and the lock nut.
  • Now the scissors can be completely disassembled.
  • The blade is pinned with three bolts in the handle half and usually dissolves easily.

Now the hinge screw can be unscrewed. Here SW 14 is used Next to it lies the spring and the lock nut.

Now the scissors can be completely disassembled.

The blade is pinned with three bolts in the handle half and usually dissolves easily.

Step 4

              The items               
  • The scissors are disassembled. We see the pivot nut, the hinge screw, the spring, the two handles and the blade.

The scissors are disassembled. We see the pivot nut, the hinge screw, the spring, the two handles and the blade.

Step 5

              maintenance               
  • The blade is ground on one side. Sharpen the beveled edge with about 15 degrees, only deburr the straight edge with a maximum of 5 degrees.
  • The parts should be free from rust and freshly oiled or greased.

The blade is ground on one side. Sharpen the beveled edge with about 15 degrees, only deburr the straight edge with a maximum of 5 degrees.

The parts should be free from rust and freshly oiled or greased.

Repeat the steps in order to reassemble your device.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             


        These translators are helping us fix the world!      Want to contribute?      Start translating › 

Special thanks to these translators:

100%

irlanda

VauWeh

Author

                                      with 2 other contributors 

                    VauWeh                     

Member since: 10/19/2015

160,441 Reputation

                                      210 Guides authored                  



                       Badges:
                       41







                                                        +38 more badges