Difficulty
Easy
Steps
6
Time Required
4 - 5 minutes
Sections
1
- Shower Curtain Permanent Rod Replacement
- 6 steps
Flags
0
BackFast Fix
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Shower Curtain Permanent Rod Replacement
- Use a measuring tape to measure the length of the rod in order to make sure the replacement is the same length.
Use a measuring tape to measure the length of the rod in order to make sure the replacement is the same length.
1024
Step 2
- Using your flathead screwdriver or your screwdriver gun, loosen the screw by turning it counterclockwise.
Using your flathead screwdriver or your screwdriver gun, loosen the screw by turning it counterclockwise.
Step 3
- Remove the old rod as well as the brackets.
Remove the old rod as well as the brackets.
Step 4
- Use disinfecting wipes to clean the area on the wall where the old brackets were.
Use disinfecting wipes to clean the area on the wall where the old brackets were.
Step 5
- Grab your new shower curtain rod.
- If preferred, hold your old shower curtain rod against your new one to make sure they are both the same size.
Grab your new shower curtain rod.
If preferred, hold your old shower curtain rod against your new one to make sure they are both the same size.
Step 6
- Lastly, using your flat head screwdriver or screwdriver gun, rotate the screw clockwise to tighten the screw.
Lastly, using your flat head screwdriver or screwdriver gun, rotate the screw clockwise to tighten the screw.
To reassemble your device, follow these instructions in reverse order
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Abdul-Jabbar Mohamed
Member since: 09/15/2020
134 Reputation
1 Guide authored
Badges:
3
Team
York University, Team 2-16, O'Regan Winter 2022
Member of York University, Team 2-16, O'Regan Winter 2022
YORK-O'REGAN-W22S2G16
1 Member
1 Guide authored
