Fast Fix Hp Proliant Ml310E Gen8 V2 Ram Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          30 minutes            

Sections

1

• HP ProLiant ML310e Gen8 v2 Ram
• 7 steps

Flags

0

• BackHP ProLiant ML310e Gen 8 v2

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              HP ProLiant ML310e Gen8 v2 Ram               

• Before you begin, make sure the power is unplugged from the computer. Use key to open the front cover, take off the cover and lay it on the side.

Before you begin, make sure the power is unplugged from the computer. Use key to open the front cover, take off the cover and lay it on the side.

1024

Step 2

• Unscrew the self tapping screw in the back of the PC. (If the screw is on too tight, you can use the Phillips screwdriver). The screw will not come off, leave it like it is.

Unscrew the self tapping screw in the back of the PC. (If the screw is on too tight, you can use the Phillips screwdriver). The screw will not come off, leave it like it is.

Step 3

• Pull the side cover off by putting fingers in the side cover holder and pull back. Take the cover and lay it on the side.

Pull the side cover off by putting fingers in the side cover holder and pull back. Take the cover and lay it on the side.

Step 4

• Lay the computer on the side with the uncovered side facing up.

Lay the computer on the side with the uncovered side facing up.

Step 5

• Attach the anti-static wrist strap. Clip the other end of the anti-static wrist strap to any metal piece on the computer. This will keep the computer from being fried.

Attach the anti-static wrist strap. Clip the other end of the anti-static wrist strap to any metal piece on the computer. This will keep the computer from being fried.

Step 6

• Take the air cover off and lay it off on the side.

Take the air cover off and lay it off on the side.

Step 7

• Push the clips at each end of each slot to release the RAM sticks.

Push the clips at each end of each slot to release the RAM sticks.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Michael Bondurant                     

Member since: 11/07/2019

145 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       University of Memphis, Team S1-G20, Willis Fall 2019                        

                                                  Member of University of Memphis, Team S1-G20, Willis Fall 2019 



                    UM-WILLIS-F19S1G20                     


                                            1 Member                     


                                            1 Guide authored                     

Ali Hameed - Jan 14, 2023

Reply

My device is not working and I don’t know if the problem is with Windows on the hard disk

My device is (proliant ML310e Gen8 v2)