Farberware Fsto100 Indicator Light Replacement Repair Guide

Difficulty

Difficult

Steps

11

Time Required

                          30 minutes            

Sections

1

• Indicator Light
• 11 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

• BackFarberware FSTO100

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Indicator Light               

• Make sure toaster is unplugged.
• Turn toaster upside down so screws on bottom side are facing toward the ceiling and the door is facing towards you.

Make sure toaster is unplugged.

Turn toaster upside down so screws on bottom side are facing toward the ceiling and the door is facing towards you.

1024

Step 2

• On the left hand side, unscrew the middle screw.

On the left hand side, unscrew the middle screw.

Step 3

• Remove the panel on the left hand side. The indicator light is located in the red tube that has wires covered by black tubing coming out.

Remove the panel on the left hand side. The indicator light is located in the red tube that has wires covered by black tubing coming out.

Step 4

• Pull the black wires to remove the indicator light from the red tube.

Pull the black wires to remove the indicator light from the red tube.

Step 5

• Use scissors to cut open cord sheathing and peel back.

Use scissors to cut open cord sheathing and peel back.

Step 6

• Use the wire-cutters to remove the light bulb.

Use the wire-cutters to remove the light bulb.

Step 7

• Solder the replacement light bulb back onto its original position.

Solder the replacement light bulb back onto its original position.

Step 8

• Use electrical tape to reseal the sheathing.

Use electrical tape to reseal the sheathing.

Step 9

• Reinsert the indicator light back into the red tube.

Reinsert the indicator light back into the red tube.

Step 10

• Turn toaster upside down so screws on bottom side are facing toward the ceiling and the door is facing towards you.

Step 11

• On the left hand side, screw the middle screw back in.

On the left hand side, screw the middle screw back in.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Tony Wang                     

Member since: 10/05/2012

103 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Cal Poly, Team 6-35, Regan Fall 2012                        

                                                  Member of Cal Poly, Team 6-35, Regan Fall 2012 



                    CPSU-REGAN-F12S6G35                     


                                            4 Members                     


                                            6 Guides authored