Fahrenheit Fht 125Prmr Heating Plate Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 20 minutes

Sections

Heating Plate
10 steps

Flags

BackFahrenheit FHT 125PRMR
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Heating Plate

Use your fingers or a plastic opening tool to open the side hinges on both sides of the device.

Use your fingers or a plastic opening tool to open the side hinges on both sides of the device.

1024

Step 2

Using a Philips head #2 screwdriver remove the 7mm black screw from the hinge of the device.

Using a Philips head #2 screwdriver remove the 7mm black screw from the hinge of the device.

Step 3

Using the metal spudger, push through the hole the screw was removed from. Doing this will push the copper pin out of the other side.
When the pin is removed the two sides of the device can now separate.
Be sure to collect the spring that is next to the hinge when they are separated.

Using the metal spudger, push through the hole the screw was removed from. Doing this will push the copper pin out of the other side.

When the pin is removed the two sides of the device can now separate.

Be sure to collect the spring that is next to the hinge when they are separated.

Step 4

Using Philips head (PH1) remove the 6 mm black screw that was underneath the spring as well as the 6 mm black screw next to the heating plate. Remove the panel the screws were holding down.

Using Philips head (PH1) remove the 6 mm black screw that was underneath the spring as well as the 6 mm black screw next to the heating plate. Remove the panel the screws were holding down.

Step 5

Using Philips head (PH1) remove the two 4 mm silver screws on the sides of dial panel cover

Using Philips head (PH1) remove the two 4 mm silver screws on the sides of dial panel cover

Step 6

Using Philips head (PH00) to remove the 4 mm silver screw on the dial. Remove the dial with your hand.

Using Philips head (PH00) to remove the 4 mm silver screw on the dial. Remove the dial with your hand.

Step 7

Remove the covering panel by pulling up with your hand.

Remove the covering panel by pulling up with your hand.

Step 8

Desolder the 4 white wires to remove the heating plate on the motherboard side.
How To Solder and Desolder Connections

Desolder the 4 white wires to remove the heating plate on the motherboard side.

How To Solder and Desolder Connections

Step 9

Remove 3 sliver screws (3mm) (PH1) from the motherboard.

Remove 3 sliver screws (3mm) (PH1) from the motherboard.

Step 10

Desolder the 2 white cables to remove the heating plate on the side of the iron without the motherboard.
How To Solder and Desolder Connections

Desolder the 2 white cables to remove the heating plate on the side of the iron without the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors

                    Omar El Mounayri

Member since: 09/29/2016

61 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       IUPUI, Team 2-2, Harley Fall 2016                        

                                                  Member of IUPUI, Team 2-2, Harley Fall 2016 



                    IUPUI-HARLEY-F16S2G2                     


                                            4 Members                     


                                            4 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team