F Paneldue Firmware Update Repair Guide

Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

1

• F. PanelDue Firmware Update
• 3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackBLV MGN Cube

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Step 1

              Downloads               

• Download the latest stable firmware from the Duet Github and extract the zip file
• Make sure you download the correct version. The PanelDue 5i and 7i both use the same firmware binary. The file you want is named “PanelDue-5.0i-7.0i.bin”
• FYSETC documentation says to use the 5i/7i combined binary(“PanelDue-5.0i-7.0i.bin”) for their 5i and 7i screens. If you use the combined version for you FYSETC 5i/7i your color scheme will be incorrect.
• You need to install “PanelDueFirmware-v3-7.0.zip” or “PanelDueFirmware-v3-5.0.zip”
• Download and install Bossa

Download the latest stable firmware from the Duet Github and extract the zip file

Make sure you download the correct version. The PanelDue 5i and 7i both use the same firmware binary. The file you want is named “PanelDue-5.0i-7.0i.bin”

FYSETC documentation says to use the 5i/7i combined binary(“PanelDue-5.0i-7.0i.bin”) for their 5i and 7i screens. If you use the combined version for you FYSETC 5i/7i your color scheme will be incorrect.

You need to install “PanelDueFirmware-v3-7.0.zip” or “PanelDueFirmware-v3-5.0.zip”

Download and install Bossa

1024

Step 2

              Connecting to your PC               

• Hold the erase button on the back of the PanelDue
• Connect a USB Micro cable from your PC to your PanelDue. Release the erase button and press the reset button.
• Identify the COM port the PanelDue is using.
• Click Start->Control Panel->System->Device Manager. Expand Ports (COM and LPT)

Hold the erase button on the back of the PanelDue

Connect a USB Micro cable from your PC to your PanelDue. Release the erase button and press the reset button.

Identify the COM port the PanelDue is using.

Click Start->Control Panel->System->Device Manager. Expand Ports (COM and LPT)

Step 3

              Flashing the Firmware               

• Once connected open Bossa.
• Select the port in the dropdown. Click Browse and select the PanelDue firmware
• Select the checkboxes for Erase all, Lock, and Boot from flash
• Click Write. Bossa will load the firmware to the PanelDue. Once upload is complete, click Verify.

Once connected open Bossa.

Select the port in the dropdown. Click Browse and select the PanelDue firmware

Select the checkboxes for Erase all, Lock, and Boot from flash

Click Write. Bossa will load the firmware to the PanelDue. Once upload is complete, click Verify.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    David Husolo                     

Member since: 06/16/2021

7,245 Reputation

                                      28 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges