Difficulty
Moderate
Steps
5
Time Required
5 minutes
Sections
2
- Bottom Cover
- 4 steps
- Roller
- 1 step
Flags
1
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackEureka EasyClean 71C
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Cover
- Unscrew the two 18.1 mm PH2 Phillips head screws on the bottom of the vacuum.
Unscrew the two 18.1 mm PH2 Phillips head screws on the bottom of the vacuum.
1024
Step 2
- Pry off the Riser Visor using the plastic opening tool.
Pry off the Riser Visor using the plastic opening tool.
Step 3
- Remove the screw cap using the metal spudger.
- First-time removal of the screw cap can be difficult. The screw cap isn’t vital, so don’t worry about damaging the screw cap and just keep trying until it comes out.
Remove the screw cap using the metal spudger.
First-time removal of the screw cap can be difficult. The screw cap isn’t vital, so don’t worry about damaging the screw cap and just keep trying until it comes out.
Step 4
- Unscrew the 14mm PH2 Phillips head screw.
- Pull the bottom cover off of the rest of the casing.
Unscrew the 14mm PH2 Phillips head screw.
Pull the bottom cover off of the rest of the casing.
Step 5
Roller
- Pull the roller, motor, and belt out of the casing.
- Separate the roller from the belt.
Pull the roller, motor, and belt out of the casing.
Separate the roller from the belt.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Tanner Durnil
Member since: 11/06/2017
631 Reputation
6 Guides authored
Badges:
10
+7 more badges
Team
IUPUI, Team S6-G4, Baechle Fall 2017
Member of IUPUI, Team S6-G4, Baechle Fall 2017
IUPUI-BAECHLE-F17S6G4
3 Members
12 Guides authored
