Difficulty

Easy

Steps

7

Time Required

                          5 minutes

Sections

2

  • Brush Roll
  • 6 steps
  • Belt
  • 1 step

Flags

0

  • BackEureka AirSpeed Bagless Zuum

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Brush Roll
  • Step on the grey release button located between the two back wheels to lower the handle flat to the floor.
  • Insure the vacuum is unplugged before starting the process of removing the brush roll.

Step on the grey release button located between the two back wheels to lower the handle flat to the floor.

Insure the vacuum is unplugged before starting the process of removing the brush roll.

1024

Step 2

  • Using a Phillips #2 screwdriver, remove the four screws from each corner of the brush roll cover.

Using a Phillips #2 screwdriver, remove the four screws from each corner of the brush roll cover.

Step 3

  • Remove the brush cover from the vacuum base, by pulling straight up.

Remove the brush cover from the vacuum base, by pulling straight up.

Step 4

  • Firmly press upwards from below the brush roll on the side opposite the belt.

Firmly press upwards from below the brush roll on the side opposite the belt.

Step 5

  • After one end is displaced, remove the other side by pressing firmly upwards from below the the brush roll.

After one end is displaced, remove the other side by pressing firmly upwards from below the the brush roll.

Step 6

  • Once the brush roll is displaced from the base, detach the belt from the brush roll in order to clean the brush roll.

Once the brush roll is displaced from the base, detach the belt from the brush roll in order to clean the brush roll.

Step 7

              Belt
  • Remove the belt from around the motor.

Remove the belt from around the motor.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.

Author

                                      with 5 other contributors 


                    Celina Burchett

Member since: 10/13/2014

1,122 Reputation

                                      8 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Clemson, Team 2-2, Benson Fall 2014                        

                                                  Member of Clemson, Team 2-2, Benson Fall 2014 



                    CLEM-BENSON-F14S2G2                     


                                            4 Members                     


                                            16 Guides authored

missouri river production - Apr 8, 2018

Reply

It was Too hard So went to stretch the belt then it was on

eternallight6 - Jul 7, 2018

Reply

To reassemble was not available for me so I kind of did it myself but I’m having trouble getting it back on straight

Sara Leinen - Dec 28, 2018

Reply

i have read every sticker on this vbacuum read several maintenance steps …. i mean DA remove four screws …huh.

now can someone tell me whart size belt to get from the store

Sara Leinen

sparkplugkitten@msn.com

nickietucker81 - Apr 22, 2020

Reply

I got it used. I turned it on it worked. Then it just turned off and want come back on some please help me

Where’s the trouble shooting