Eureka Airspeed Bagless Zuum Brush Roll Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          10 minutes            

Sections

1

• Brush Roll
• 6 steps

Flags

0

• BackEureka AirSpeed Bagless Zuum

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Brush Roll               

• Step on the grey release button located between the two back wheels to lower the handle flat to the floor.
• Insure the vacuum is unplugged before starting the process of removing the brush roll.

Step on the grey release button located between the two back wheels to lower the handle flat to the floor.

Insure the vacuum is unplugged before starting the process of removing the brush roll.

1024

Step 2

• Using a Phillips #2 screwdriver, remove the four screws from each corner of the brush roll cover.

Using a Phillips #2 screwdriver, remove the four screws from each corner of the brush roll cover.

Step 3

• Remove the brush cover from the vacuum base, by pulling straight up.

Remove the brush cover from the vacuum base, by pulling straight up.

Step 4

• Firmly press upwards from below the brush roll on the side opposite the belt.

Firmly press upwards from below the brush roll on the side opposite the belt.

Step 5

• After one end is displaced, remove the other side by pressing firmly upwards from below the the brush roll.

After one end is displaced, remove the other side by pressing firmly upwards from below the the brush roll.

Step 6

• Once the brush roll is displaced from the base, detach the belt from the brush roll in order to clean the brush roll.

Once the brush roll is displaced from the base, detach the belt from the brush roll in order to clean the brush roll.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.                                             

Author

                                      with 7 other contributors 

                    Celina Burchett                     

Member since: 10/13/2014

1,122 Reputation

                                      8 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       Clemson, Team 2-2, Benson Fall 2014                        

                                                  Member of Clemson, Team 2-2, Benson Fall 2014 



                    CLEM-BENSON-F14S2G2                     


                                            4 Members                     


                                            16 Guides authored                     

Tami Jones - Aug 17, 2018

Reply

Brush roll replacement is a no brainer. It is the brush roll assembly that turns the brush that I need to fix. Cannot determine what tool to use as it doesn’t come off using a regular screwdriver and eureka won’t tell me what to ese.