Difficulty
Easy
Steps
7
Time Required
15 - 25 minutes
Sections
1
- Filters
- 7 steps
Flags
0
BackRobotic Vacuum Cleaner
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Filters
- Press the dust collector release button.
- Pull the dust collector out.
Press the dust collector release button.
Pull the dust collector out.
1024
Step 2
- Push the blue button up and open the dust collector.
- Empty the dust collector, and throw all the dust into the trash bin.
Push the blue button up and open the dust collector.
Empty the dust collector, and throw all the dust into the trash bin.
Step 3
- Pull the hooks up to take out the pre-filter.
- Pull the filter lightly because the hook by the filter is easy to break.
Pull the hooks up to take out the pre-filter.
Pull the filter lightly because the hook by the filter is easy to break.
Step 4
- Take out the high-performance filter to the side and use a cleaning brush to clean the filter.
- Take out the foam filter to the side and dispose of it in the trash bin.
Take out the high-performance filter to the side and use a cleaning brush to clean the filter.
Take out the foam filter to the side and dispose of it in the trash bin.
Step 5
- Use the cleaning brush to sweep the dust from the pre-filter.
Use the cleaning brush to sweep the dust from the pre-filter.
Step 6
- Put the pre-filter back in the dust collector.
- Use your finger to push the top button first.
- Push the filter lightly because the hook by the filter is easy to break.
Put the pre-filter back in the dust collector.
Use your finger to push the top button first.
Push the filter lightly because the hook by the filter is easy to break.
Step 7
- Open the back of the dust collector.
- Replace the white foam filter.
- Put the black high-performance filter at the top of the foam filter.
- Make sure to put the foam filter before the high-performance filter, otherwise the robot will have problems cleaning.
Open the back of the dust collector.
Replace the white foam filter.
Put the black high-performance filter at the top of the foam filter.
Make sure to put the foam filter before the high-performance filter, otherwise the robot will have problems cleaning.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
felix
Member since: 05/13/2020
181 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
York University, Team S1-G27, O'Regan Summer 2020
Member of York University, Team S1-G27, O'Regan Summer 2020
YORK-O'REGAN-SU20S1G27
1 Member
1 Guide authored
