Eufy Robovac 11 Front Cover And Motherboard Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          5 minutes            

Sections

1

• Front Cover and Motherboard
• 5 steps

Flags

2

Missed a Step

Oops! This guide is currently missing some important steps.

Better Introduction

Improve this guide by completing or revising its introduction.

• Backeufy RoboVac 11

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Front Cover and Motherboard               

• Remove the nine 10 mm screws with the Phillips #1 precision screwdriver.
• Keep track of these screws. They are the same length as the interior screws but wider in diameter.

Remove the nine 10 mm screws with the Phillips #1 precision screwdriver.

Keep track of these screws. They are the same length as the interior screws but wider in diameter.

1024

Step 2

• Remove the six 7 mm screws on the bumper with the Phillips #1 screwdriver.

Remove the six 7 mm screws on the bumper with the Phillips #1 screwdriver.

Step 3

• Remove the top plate from the body of the device.
• Unplug the bumper from the motherboard.

Remove the top plate from the body of the device.

Unplug the bumper from the motherboard.

Step 4

• Remove the three 10 mm motherboard screws with a Phillips #1 screwdriver.
• Cleaning the motherboard and inside of the device outdoors with a compressed air cleaner will help the robot last longer.

Remove the three 10 mm motherboard screws with a Phillips #1 screwdriver.

Cleaning the motherboard and inside of the device outdoors with a compressed air cleaner will help the robot last longer.

Step 5

• Unplug the cables from the motherboard.

Unplug the cables from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Kyleigh Hill                     

Member since: 09/27/2022

205 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Utah Tech University, Team 1-3, McMurrin Fall 2022                        

                                                  Member of Utah Tech University, Team 1-3, McMurrin Fall 2022 



                    UTAHTECH-MCMURRIN-F22S1G3                     


                                            3 Members                     


                                            6 Guides authored