Difficulty

Moderate

Steps

6

Time Required

                          15 minutes

Sections

3

  • Exterior Case
  • 3 steps
  • Lens
  • 2 steps
  • Display
  • 1 step

Flags

0

  • BackEscort Passport Max2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Exterior Case
  • Inser the flat end of a spudger into one of the two notches and pry off the case.

Inser the flat end of a spudger into one of the two notches and pry off the case.

1024

Step 2

  • Slide the spudger around the perimeter of the radar housing until the case separates.

Slide the spudger around the perimeter of the radar housing until the case separates.

Step 3

  • Repeat these steps to remove the other side.

Repeat these steps to remove the other side.

Step 4

              Lens
  • Remove the four 9mm Phillips #1 screws from the bottom of the radar.
  • Remove the bottom case.

Remove the four 9mm Phillips #1 screws from the bottom of the radar.

Remove the bottom case.

Step 5

  • Gently spread apart the thin silver frame that wraps around the device and remove the dark purple lens.
  • The silver frame can easily pop off of the device now that the bottom metal case has been removed. Don’t worry if it comes off all the way. It can easily be put back in it’s place.

Gently spread apart the thin silver frame that wraps around the device and remove the dark purple lens.

The silver frame can easily pop off of the device now that the bottom metal case has been removed. Don’t worry if it comes off all the way. It can easily be put back in it’s place.

Step 6

              Display
  • Push the two black tabs down to release the ribbon attached to the display.
  • The display ribbon should now easily slip out from under the white strip.

Push the two black tabs down to release the ribbon attached to the display.

The display ribbon should now easily slip out from under the white strip.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Kelsey Ferrenberg

Member since: 04/12/2018

710 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       UW Tacoma, Team S1-G1, Liner Spring 2018                        

                                                  Member of UW Tacoma, Team S1-G1, Liner Spring 2018 



                    UWT-LINER-S18S1G1                     


                                            5 Members                     


                                            4 Guides authored

Doug Denny - Sep 17, 2018

Reply

Kelsey, Where do you get the part? I need a replacement screen for my Passport Max FB30947A3. Escort customer service won’t sell it to me and requires me to send the unit to them for a bog fee.

Aaron k - Oct 18, 2018

Reply

I also need to replace my screen and would like to know where I can get the part. Mine was dropped and the screen cracked. I do not feel like spending $139 to repair an older detector. Thanks for any info you can provide!

Jeff Dowdy - Dec 22, 2018

Reply

I need a display screen for a max 2

Mike Rumble - Sep 26, 2019

Reply

Where can a replacement screen be ordered?

John - Feb 6, 2021

Escort Max II screens are now available in ebay