Difficulty
Moderate
Steps
6
Time Required
8 minutes
Sections
2
- Back Panel
- 2 steps
- Display
- 4 steps
Flags
0
BackEscort Passport 9500IX
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Remove the three 1.2 mm Phillips #1 screws on the back of the device.
Remove the three 1.2 mm Phillips #1 screws on the back of the device.
1024
Step 2
- Pry off the back panel of the radar using the nylon spudger.
Pry off the back panel of the radar using the nylon spudger.
Step 3
Display
- Carefully pry the grey frame off the black plastic covering using the nylon spudger.
Carefully pry the grey frame off the black plastic covering using the nylon spudger.
Step 4
- Detach the orange flap from the motherboard using a nylon spudger.
- Carefully remove the motherboard from the grey plastic frame.
Detach the orange flap from the motherboard using a nylon spudger.
Carefully remove the motherboard from the grey plastic frame.
Step 5
- Detach the remaining two orange flaps from the circuit board that is attached onto the grey frame.
Detach the remaining two orange flaps from the circuit board that is attached onto the grey frame.
Step 6
- Detach the display from the grey frame.
Detach the display from the grey frame.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Jiahao Xu
Member since: 10/25/2018
177 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
UMass Dartmouth, Team S2-G3, Peak Fall 2018
Member of UMass Dartmouth, Team S2-G3, Peak Fall 2018
UMASSD-PEAK-F18S2G3
3 Members
7 Guides authored