Difficulty
Moderate
Steps
7
Time Required
8 minutes
Sections
3
- Back Panel
- 2 steps
- Buttons
- 2 steps
- Button Board
- 3 steps
Flags
1
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackEscort Passport 9500IX
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Remove the three 1.2 mm Phillips #1 screws on the back of the device.
Remove the three 1.2 mm Phillips #1 screws on the back of the device.
1024
Step 2
- Pry off the back panel of the radar using the nylon spudger.
Pry off the back panel of the radar using the nylon spudger.
Step 3
Buttons
- Carefully pry the grey frame off the black plastic covering using the nylon spudger.
Carefully pry the grey frame off the black plastic covering using the nylon spudger.
Step 4
- Slowly peel the buttons off the button board.
Slowly peel the buttons off the button board.
Step 5
Button Board
- Detach the orange flap on the motherboard.
- Carefully remove the motherboard from the grey plastic frame.
Detach the orange flap on the motherboard.
Carefully remove the motherboard from the grey plastic frame.
Step 6
- Detach the orange flap directly behind the button board.
Detach the orange flap directly behind the button board.
Step 7
- Carefully pull out the button board from the grey frame.
Carefully pull out the button board from the grey frame.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Kennedy Morales
Member since: 10/20/2017
655 Reputation
6 Guides authored
Badges:
9
+6 more badges
Team
UMass Dartmouth, Team S2-G3, Peak Fall 2018
Member of UMass Dartmouth, Team S2-G3, Peak Fall 2018
UMASSD-PEAK-F18S2G3
3 Members
7 Guides authored
