Equity Alarm Clock 13014 Clock Hands Replacement Repair Guide

Difficulty

Moderate

Steps

12

Time Required

                          15 - 30 minutes            

Sections

1

• Clock Hands
• 12 steps

Flags

0

• BackEquity 13014

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

First, you must remove the back of the clock.

Second you must remove parts of the clock’s inner apparatus.

Last, you must remove the clock’s entire inner apparatus from its golden cover in order to remove the hands.

What you need

Step 1

              Screws and Back Plate               

• Using a Phillips screwdriver, remove the top screw.
• Repeat for other two screws located on the lower right and left sides of the clock.

Using a Phillips screwdriver, remove the top screw.

Repeat for other two screws located on the lower right and left sides of the clock.

1024

Step 2

              Back Plate and Clock's Inner Apparatus               

• Place fingers on ridge around back plate and pull upward.

Place fingers on ridge around back plate and pull upward.

Step 3

              Silver Base and Cellinoid               

• Using a Phillips screwdriver, remove the silver base located on top of cellinoid in upper right hand of inner clock.

Using a Phillips screwdriver, remove the silver base located on top of cellinoid in upper right hand of inner clock.

Step 4

              The Bell               

• Using a Phillips Screwdriver, remove bell from inner clock.

Using a Phillips Screwdriver, remove bell from inner clock.

Step 5

              Cellinoid From Clock               

• Cellinoid is located below Silver Base. Remove Cellinoid with your fingers and pull it up from the inner clock apparatus.

Cellinoid is located below Silver Base. Remove Cellinoid with your fingers and pull it up from the inner clock apparatus.

Step 6

              Bottom Legs               

• Remove the bottom legs of the clock by unscrewing them with your fingers.
• Caution: you may need to use a pair of pliers if bottom legs are attached too tight.

Remove the bottom legs of the clock by unscrewing them with your fingers.

Caution: you may need to use a pair of pliers if bottom legs are attached too tight.

Step 7

              Right Bell Screw               

• Using your hands, unscrew top screw located on top of the right bell.
• Caution: You may need to use a pair of pliers to loosen the screw.

Using your hands, unscrew top screw located on top of the right bell.

Caution: You may need to use a pair of pliers to loosen the screw.

Step 8

              Left Bell Screw               

• Repeat Directions in Step 6 but on the left bell screw.
• Caution: You may need to use a pair of pliers.

Repeat Directions in Step 6 but on the left bell screw.

Caution: You may need to use a pair of pliers.

Step 9

              Bells and Connecting Bar               

• After you remove the screws for both bells, both of the two bells and the bar connecting the two bells will easily come off. Remove these three components with your fingers.

After you remove the screws for both bells, both of the two bells and the bar connecting the two bells will easily come off. Remove these three components with your fingers.

Step 10

              Remainder of Inner Clock Apparatus               

• Using your hand, remove the entire black, inner apparatus of clock. The golden ridge of the clock is attached to the glass screen.

Using your hand, remove the entire black, inner apparatus of clock. The golden ridge of the clock is attached to the glass screen.

Step 11

              Inner Clock Apparatus Around and Clock Numbers               

• In the front of the clock apparatus are the twelve numbers, minute hand, second hand, and hour hand.

In the front of the clock apparatus are the twelve numbers, minute hand, second hand, and hour hand.

Step 12

              Clock Hands               

• Using a pair of tweezers, remove the golden peg in the center of the clock. This attaches the minute, hour and second hands.
• After you have removed the golden peg, use the pair of tweezers to remove hour, minute and second hands.

Using a pair of tweezers, remove the golden peg in the center of the clock. This attaches the minute, hour and second hands.

After you have removed the golden peg, use the pair of tweezers to remove hour, minute and second hands.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Michael Johnson                     

Member since: 11/03/2014

300 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Eastern Washington University, Team 1-6, Carnegie Fall 2014                        

                                                  Member of Eastern Washington University, Team 1-6, Carnegie Fall 2014 



                    EWU-CARNEGIE-F14S1G6                     


                                            6 Members                     


                                            6 Guides authored