Difficulty

Difficult

Steps

5

Time Required

Suggest a time??

Sections

1

  • Alarm Switch
  • 5 steps

Flags

4

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackEquity 13014

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Replacing the alarm switch
  • Remove the battery door using your finger nail or an opening tool.

Remove the battery door using your finger nail or an opening tool.

1024

Step 2

              Remove screws
  • Use a Phillips #1 screwdriver to remove the 3 screws on the back cover.

Use a Phillips #1 screwdriver to remove the 3 screws on the back cover.

Step 3

              Remove Cover
  • Remove the back cover.
  • DO NOT cut the wires attached on the cover.

Remove the back cover.

DO NOT cut the wires attached on the cover.

Step 4

  • Use Phillips #1 screwdriver to remove the small screw located above the alarm switch.
  • Remove the small screw located below the alarm switch.

Use Phillips #1 screwdriver to remove the small screw located above the alarm switch.

Remove the small screw located below the alarm switch.

Step 5

  • Place the end of the soldering iron to the end of the wire on the copper cylinder to detach the wire.
  • If you are unfamiliar with soldering, take a look at this article,How to Solder and Desolder Connections.
  • To replace the alarm switch, attach one end of new alarm switch wire to the copper cylinder.
  • Use a Phillips #1 screwdriver to reinstall the switch screws.
  • Follow steps in reverse order to assemble the clock.

Place the end of the soldering iron to the end of the wire on the copper cylinder to detach the wire.

If you are unfamiliar with soldering, take a look at this article,How to Solder and Desolder Connections.

To replace the alarm switch, attach one end of new alarm switch wire to the copper cylinder.

Use a Phillips #1 screwdriver to reinstall the switch screws.

Follow steps in reverse order to assemble the clock.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 8 other contributors 


                    Alaa

Member since: 10/27/2014

287 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Eastern Washington University, Team 1-6, Carnegie Fall 2014                        

                                                  Member of Eastern Washington University, Team 1-6, Carnegie Fall 2014 



                    EWU-CARNEGIE-F14S1G6                     


                                            6 Members                     


                                            6 Guides authored