Epson Vs240 Bulb Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 - 15 minutes

Sections

Bulb
5 steps

Flags

BackEpson VS240
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Bulb

Unplug the device and let it cool for an hour.
Place the device on a flat surface.

Unplug the device and let it cool for an hour.

Place the device on a flat surface.

1024

Step 2

Using the Phillips #2 screwdriver, loosen the single screw securing the lamp cover.
Be careful of broken glass in the case that your bulb has been broken.
If there is broken glass, carefully shake the device to get the shards of glass on a piece of paper. Carefully dispose of the paper with the glass shards on it.

Using the Phillips #2 screwdriver, loosen the single screw securing the lamp cover.

Be careful of broken glass in the case that your bulb has been broken.

If there is broken glass, carefully shake the device to get the shards of glass on a piece of paper. Carefully dispose of the paper with the glass shards on it.

Step 3

Carefully slide the cover and lift it off the device.
Again, be careful of any broken parts within the device.

Carefully slide the cover and lift it off the device.

Again, be careful of any broken parts within the device.

Step 4

Use the Phillips #2 screwdriver to loosen the screws attaching the bulb to the projector.
You only need to loosen the screws since they do not remove from the bulb completely.

Use the Phillips #2 screwdriver to loosen the screws attaching the bulb to the projector.

You only need to loosen the screws since they do not remove from the bulb completely.

Step 5

Once the bulb has been loosened, grab the raised section of the bulb and carefully lift the bulb up and away from the device.

Once the bulb has been loosened, grab the raised section of the bulb and carefully lift the bulb up and away from the device.

To reassemble your device, follow these instructions in reverse order.

Be gentle when inserting the new bulb. If you feel any resistance when inserting the replacement bulb, chances are that you inserted it the wrong way. This is a common mistake. Turn it around, making it face the right direction, before again inserting it into the device.

Be careful when screwing components back into the device since over-screwing can result in damage to the pieces.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Toni Brennan

Member since: 09/28/2021

121 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Clemson, Team 5-3, Hunter Fall 2021                        

                                                  Member of Clemson, Team 5-3, Hunter Fall 2021 



                    CLEM-HUNTER-F21S5G3                     


                                            5 Members                     


                                            6 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team