Epson Stylus Nx240 Side Buttons Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          15 - 30 minutes            

Sections

1

• Side Buttons
• 6 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackEpson Stylus NX240

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Side Buttons               

• Go to the left side of the printer and locate the control panel with the buttons on it.
• Take a plastic opening tool and stick it in the crack between the top of the panel and the body of the printer.
• Pry the cover of the panel away from the body of the printer until the panel releases from the body of the printer.

Go to the left side of the printer and locate the control panel with the buttons on it.

Take a plastic opening tool and stick it in the crack between the top of the panel and the body of the printer.

Pry the cover of the panel away from the body of the printer until the panel releases from the body of the printer.

1024

Step 2

• Carefully lift up the panel cover and turn it to its side so that the buttons are facing towards the rest of the printer.
• Notice that the panel cover is attached to the printer with a ribbon cable. The ribbon cable must stay connected to the body of the printer or else the buttons will be unresponsive once replaced.

Carefully lift up the panel cover and turn it to its side so that the buttons are facing towards the rest of the printer.

Notice that the panel cover is attached to the printer with a ribbon cable. The ribbon cable must stay connected to the body of the printer or else the buttons will be unresponsive once replaced.

Step 3

• Remove the six 3mm Phillips #2 screws connecting the control panel to the circuit board.

Remove the six 3mm Phillips #2 screws connecting the control panel to the circuit board.

Step 4

• After unscrewing, carefully lift the plastic part of the control panel away from the circuit board.
• The plastic part of the control panel is now separate.

After unscrewing, carefully lift the plastic part of the control panel away from the circuit board.

The plastic part of the control panel is now separate.

Step 5

• Flip over the plastic part of the now separated control panel.
• Remove the buttons by pulling them up with your fingers.

Flip over the plastic part of the now separated control panel.

Remove the buttons by pulling them up with your fingers.

Step 6

• All parts should be separate now to clean or replace.

All parts should be separate now to clean or replace.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Joshua Fabel                     

Member since: 10/13/2016

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       University of Maine, Team 2-4, Diaz Fall 2016                        

                                                  Member of University of Maine, Team 2-4, Diaz Fall 2016 



                    UMAINE-DIAZ-F16S2G4                     


                                            4 Members                     


                                            1 Guide authored