Difficulty
Very easy
Steps
4
Time Required
Suggest a time??
Sections
1
- Ink Cartridge
- 4 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackEpson Stylus C84
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Step 1
Ink Cartridge
- When the red light is flashing, one or more ink cartridges are low. When the red ink light stays on, at least one cartridge needs to be replaced.
- Turn off the printer. The power light should be on, but not flashing. Make sure the output tray is lowered. Then open the printer cover.
- Open the printer and move the carriage with the ink cartridges to the left so you have access to them.
When the red light is flashing, one or more ink cartridges are low. When the red ink light stays on, at least one cartridge needs to be replaced.
Turn off the printer. The power light should be on, but not flashing. Make sure the output tray is lowered. Then open the printer cover.
Open the printer and move the carriage with the ink cartridges to the left so you have access to them.
1024
Step 2
- Pinch the back tab of the empty cartridge as you lift it out of the printer.
- Don’t take the used cartridge apart or try to refill it.
Pinch the back tab of the empty cartridge as you lift it out of the printer.
Don’t take the used cartridge apart or try to refill it.
Step 3
- Shake the new cartridge inside the packaging four or five times before installing it. This will keep your hands clean and loosen the ink.
- Turn off the printer. The power light should be on, but not flashing. Make sure the output tray is lowered. Then open the printer cover.
- Press the ink button for one second. The print head moves to the left, and the cartridge that needs to be replaced stops under the need ink mark. The power light also begins to flash.
Shake the new cartridge inside the packaging four or five times before installing it. This will keep your hands clean and loosen the ink.
Press the ink button for one second. The print head moves to the left, and the cartridge that needs to be replaced stops under the need ink mark. The power light also begins to flash.
Step 4
- Place the cartridge into the cartridge holder. Push down gently until the cartridge is firmly seated. You will hear a click.
- Close the cartridge cover.
- Close the printer cover and press the ink button for one second. The printer head will move as the new ink system is formatted.
- The green power light will flash and the printer will make noise. It will take about a minute and once finished, the power light will stop flashing.
Place the cartridge into the cartridge holder. Push down gently until the cartridge is firmly seated. You will hear a click.
Close the cartridge cover.
Close the printer cover and press the ink button for one second. The printer head will move as the new ink system is formatted.
The green power light will flash and the printer will make noise. It will take about a minute and once finished, the power light will stop flashing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Sarah
Member since: 10/07/2013
246 Reputation
2 Guides authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team 1-3, Gulbrandsen Fall 2012
Member of UMass Dartmouth, Team 1-3, Gulbrandsen Fall 2012
UMASSD-GULBRANDSEN-F12S1G3
1 Member
2 Guides authored
