Epson Powerlite S4 Exhaust Fan Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          10 - 20 minutes            

Sections

1

• Exhaust Fan
• 5 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

• BackEpson PowerLite S4

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Exhaust Fan               

• With the bottom of the projector facing you, use a Phillips #00 screwdriver to remove the seven screws.

With the bottom of the projector facing you, use a Phillips #00 screwdriver to remove the seven screws.

1024

Step 2

• Use a Phillips #00 screwdriver to remove one screw on the backside of the projector.
• Slide the panel off.

Use a Phillips #00 screwdriver to remove one screw on the backside of the projector.

Slide the panel off.

Step 3

• Lift the top chassis from the backside of the projector, with care not to damage any connections.
• Disconnect the two cables from the motherboard.

Lift the top chassis from the backside of the projector, with care not to damage any connections.

Disconnect the two cables from the motherboard.

Step 4

• Use a Phillips #00 screwdriver to remove one screw.
• Lift the fan and its mount up and out of the projector.

Use a Phillips #00 screwdriver to remove one screw.

Lift the fan and its mount up and out of the projector.

Step 5

• Use a Phillips #00 screwdriver to remove the two screws securing the fan to its housing, then gently pull them apart to separate each piece.

Use a Phillips #00 screwdriver to remove the two screws securing the fan to its housing, then gently pull them apart to separate each piece.

To reassemble your device, follow these instructions in reverse order using the new exhaust fan.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Max Askew                     

Member since: 03/28/2022

221 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       UMass Dartmouth, Team 1-1, Petersen Spring 2022                        

                                                  Member of UMass Dartmouth, Team 1-1, Petersen Spring 2022 



                    UMASSD-PETERSEN-S22S1G1                     


                                            3 Members                     


                                            3 Guides authored