Difficulty
Moderate
Steps
16
Time Required
30 - 50 minutes
Sections
3
- Motherboard
- 9 steps
- Projector Lens
- 3 steps
- Power Supply
- 4 steps
Flags
1
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
BackEpson PowerLite 822 Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Flip the projector over.
- Remove all 8 screws on the bottom of the projector.
Flip the projector over.
Remove all 8 screws on the bottom of the projector.
1024
Step 2
- Now, flip the projector back over and pry the top of it open revealing the inside of the projector.
Now, flip the projector back over and pry the top of it open revealing the inside of the projector.
Step 3
- Use the spudger to disconnect it from the motherboard.
Use the spudger to disconnect it from the motherboard.
Step 4
- Using your finger gently move back and forth the JST cable that connects the top to the motherboard.
- Now completely take off the top of the projector.
Using your finger gently move back and forth the JST cable that connects the top to the motherboard.
Now completely take off the top of the projector.
Step 5
- Remove the 3 screws that secure the motherboard in place.
Remove the 3 screws that secure the motherboard in place.
Step 6
- Gently move back and forth the 11 JST connectors until they come out.
Gently move back and forth the 11 JST connectors until they come out.
Step 7
- With the spudger lift the red plastic tabs from their connectors.
With the spudger lift the red plastic tabs from their connectors.
Step 8
- Lift the motherboard and disconnect the JST connector underneath.
Lift the motherboard and disconnect the JST connector underneath.
Step 9
- Now, the motherboard is completely removed from the projector and you are ready to replace it.
Now, the motherboard is completely removed from the projector and you are ready to replace it.
Step 10
Projector Lens
- Unscrew the four 6mm screws that hold together the fan bracket.
Unscrew the four 6mm screws that hold together the fan bracket.
Step 11
- Unscrew the four 6mm screws that secure the projector.
Unscrew the four 6mm screws that secure the projector.
Step 12
- Pull out the loose projector.
Pull out the loose projector.
Step 13
Power Supply
- Remove the power plug attached to the bracket which kept the fan in place by rocking it back and forth and gently pull up when it is loose.
Remove the power plug attached to the bracket which kept the fan in place by rocking it back and forth and gently pull up when it is loose.
Step 14
- Remove the rest of the bracket which helped keep the exhaust fan in place.
Remove the rest of the bracket which helped keep the exhaust fan in place.
Step 15
- Use a Phillips #2 screwdriver to remove the two 6 mm screws that secure the wire guide.
Use a Phillips #2 screwdriver to remove the two 6 mm screws that secure the wire guide.
Step 16
- Gently lift up the wire guide to remove the wires.
- Use your fingers to firmly press on the sides of the power plug and lift it upward.
- You will now be able to remove and replace the power supply.
Gently lift up the wire guide to remove the wires.
Use your fingers to firmly press on the sides of the power plug and lift it upward.
You will now be able to remove and replace the power supply.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Emma Richey
Member since: 03/21/2022
665 Reputation
5 Guides authored
Badges:
5
+2 more badges
Team
University of Alabama, Team 1-3, Bedsole Spring 2022
Member of University of Alabama, Team 1-3, Bedsole Spring 2022
UA-BEDSOLE-S22S1G3
4 Members
5 Guides authored
