Difficulty

Easy

Steps

5

Time Required

                          10 - 25 minutes

Sections

1

  • Lamp
  • 5 steps

Flags

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackEpson PowerLite 83+

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before beginning this repair, be sure to to turn off the projector and unplug the device from the power source. Allow the projector to cool for an hour if it has been just been used recently as well.

What you need

Step 1

              Lamp
  • Turn off and unplug the projector.
  • Allow the projector to cool for an hour before performing maintenance on it.

Turn off and unplug the projector.

Allow the projector to cool for an hour before performing maintenance on it.

1024

Step 2

  • Remove the 6 mm Phillips #2 screw securing the lamp cover.

Remove the 6 mm Phillips #2 screw securing the lamp cover.

Step 3

  • Apply gentle pressure to the end of the lamp cover.
  • Pull the lamp cover towards the end of the projector.
  • When the cover is released, pull the cover straight up off of the projector to reveal the lamp.

Apply gentle pressure to the end of the lamp cover.

Pull the lamp cover towards the end of the projector.

When the cover is released, pull the cover straight up off of the projector to reveal the lamp.

Step 4

  • Loosen the two captive Phillips #2 screws securing the lamp.
  • Captive screws cannot be removed. They are secured to the lamp itself with retaining rings and will be removed along with the lamp.

Loosen the two captive Phillips #2 screws securing the lamp.

Captive screws cannot be removed. They are secured to the lamp itself with retaining rings and will be removed along with the lamp.

Step 5

  • Gently grip the lamp by the finger hold.
  • Remove the lamp by pulling it off the guide rail, straight out of the projector.

Gently grip the lamp by the finger hold.

Remove the lamp by pulling it off the guide rail, straight out of the projector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Billy Fox

Member since: 02/22/2022

437 Reputation

                                      3 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Clemson, Team 2-4, Hunter Spring 2022                        

                                                  Member of Clemson, Team 2-4, Hunter Spring 2022 



                    CLEM-HUNTER-S22S2G4                     


                                            4 Members                     


                                            6 Guides authored