Epson Powerlite 822 Plus Lamp Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          9 - 15 minutes            

Sections

1

• Lamp
• 5 steps

Flags

0

• BackEpson PowerLite 822 Plus

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Lamp               

• If you just used the projector you will want to let it sit for about an hour to cool off.
• If you have not used the projector within the past few hours you are ready to get to work.

If you just used the projector you will want to let it sit for about an hour to cool off.

If you have not used the projector within the past few hours you are ready to get to work.

1024

Step 2

• Use a Phillips #2 screwdriver to remove the 6 mm screw that holds the lamp cover in place.

Use a Phillips #2 screwdriver to remove the 6 mm screw that holds the lamp cover in place.

Step 3

• Apply pressure to the lamp cover, pulling it towards the end of the projector.
• Pop the lamp cover off, exposing the lamp.

Apply pressure to the lamp cover, pulling it towards the end of the projector.

Pop the lamp cover off, exposing the lamp.

Step 4

• There are two 9mm screws which have already been loosened. These screws do not come all the way out.
• Grip the finger hold and pull it straight out of the projector.

There are two 9mm screws which have already been loosened. These screws do not come all the way out.

Grip the finger hold and pull it straight out of the projector.

Step 5

• After pulling it straight up by the finger hold the lamp will be revealed and ready to be replaced.

After pulling it straight up by the finger hold the lamp will be revealed and ready to be replaced.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Emma Richey                     

Member since: 03/21/2022

665 Reputation

                                      5 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       University of Alabama, Team 1-3, Bedsole Spring 2022                        

                                                  Member of University of Alabama, Team 1-3, Bedsole Spring 2022 



                    UA-BEDSOLE-S22S1G3                     


                                            4 Members                     


                                            5 Guides authored